Sarkar M; Hossain R; Peng J; Thilakarathna DK; Wang Y; Yao Y; Sharma N; Sahajwalla V,
2026,
'Tuning Li+ and Na+ Functionality in Renewable Carbon Electroactive Material Through Site-Specific Nanostructural Disorder',
Advanced Science,
http://dx.doi.org/10.1002/advs.202523383 2026
Behera PR; Farzana R; Sahajwalla V,
2025,
'Simultaneous thermal preparation of ultra-pure ZnO nano-wires and recovery of pure MnO from waste alkaline batteries',
Ceramics International,
51,
pp. 17593 - 17606,
http://dx.doi.org/10.1016/j.ceramint.2025.01.533 2025
Siddika A; Hajimohammadi A; Sahajwalla V,
2025,
'Sintering Behaviour, Physical Properties and Environmental Assessment of Glass Foam from Waste Glass',
Waste and Biomass Valorization,
16,
pp. 4479 - 4490,
http://dx.doi.org/10.1007/s12649-025-02929-6 2025
Hajian Foroushani M; Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2025,
'Waste-Derived Zn-Based ASEI Layer for Enhanced Lithium Anodes in Lithium–Sulfur Batteries',
Advanced Sustainable Systems,
9,
http://dx.doi.org/10.1002/adsu.202401055 2025
Payel S; Pahlevani F; Ghose A; Sahajwalla V,
2025,
'From bulk to bits: Understanding the degradation dynamics from plastics to microplastics, geographical influences and analytical approaches',
Environmental Toxicology and Chemistry,
44,
pp. 895 - 915,
http://dx.doi.org/10.1093/etojnl/vgaf037 2025
Hajian Foroushani M; Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2025,
'Sustainable energy storage: Microwave-assisted repurposing of disposable masks',
Journal of Energy Storage,
112,
http://dx.doi.org/10.1016/j.est.2025.115510 2025
Kumar R; Nekouei RK; Sahajwalla V,
2025,
'In-situ carbon-coated iron oxide (ISCC-Fe3O4) as an efficient electrode material for supercapacitor applications',
Ceramics International,
51,
pp. 12312 - 12320,
http://dx.doi.org/10.1016/j.ceramint.2025.01.071 2025
Abideen ZU; Khayyam Nekouei R; Hajian Foroushani M; Maroufi S; Pahlevani F; Sahajwalla V,
2025,
'Regenerated and reformed gold and titanium dioxide quantum dots from waste for sustainable and efficient environmental monitoring',
Nanoscale,
17,
pp. 14368 - 14380,
http://dx.doi.org/10.1039/d4nr04726e 2025
Ali A; Hossain R; Heriyanto ; Sahajwalla V,
2025,
'Valorisation of plastic and wood waste through the incorporation in basalt fibre reinforced polymeric composites: A critical review',
Process Safety and Environmental Protection,
198,
http://dx.doi.org/10.1016/j.psep.2025.107016 2025
Hajian Foroushani M; Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2025,
'Artificial solid electrolyte interphase: The Holy Grail for Li-S batteries',
Renewable and Sustainable Energy Reviews,
212,
http://dx.doi.org/10.1016/j.rser.2025.115453 2025
Kh. Nekouei R; Salehi H; Hajian Foroushani M; Maroufi S; Sahajwalla V,
2025,
'Microrecycling of waste solar cells via an in-situ fluorine-generating thermal treatment for high purity silicon recovery',
Resources Conservation and Recycling,
215,
http://dx.doi.org/10.1016/j.resconrec.2025.108150 2025
Foroushani MH; Maroufi S; Nekouei RK; Aziz M; Sahajwalla V,
2025,
'Sustainable and dual-optimized electrode design from waste resources for high-energy lithium–sulfur batteries',
Journal of Environmental Chemical Engineering,
13,
http://dx.doi.org/10.1016/j.jece.2025.118114 2025
Hossain R; Ali A; Sarkar M; Sahajwalla V,
2025,
'Understanding the multiple characteristics of microplastics generated from polypropylene bottles',
Environmental Nanotechnology Monitoring and Management,
24,
http://dx.doi.org/10.1016/j.enmm.2025.101103 2025
Hossain R; Ghose A; Sahajwalla V,
2025,
'Microplastics pollution in Australia: Sources, impacts, and mitigation strategies',
Case Studies in Chemical and Environmental Engineering,
11,
http://dx.doi.org/10.1016/j.cscee.2024.101036 2025
Abideen ZU; Nekouei RK; Hajian-Foroushani M; Maroufi S; Sahajwalla V,
2025,
'Greening of coffee waste through its transformation into clean and structurally stable activated carbon for energy storage applications',
Nanoscale Advances,
7,
pp. 7930 - 7942,
http://dx.doi.org/10.1039/d5na00658a 2025
Wootton N; Reis-Santos P; Przeslawski R; Adyel TM; Blewitt M; Clarke B; Crutchett T; Ghose A; Hajbane S; Hamann M; Hardesty BD; Hossain R; Lavers JL; Leterme SC; Leusch FDL; Lynch SK; MacGregor M; Motti CA; Noble W; OBrien A; Palanisami T; Okoffo ED; Perera K; Puskic P; Hollis JR; Roman L; Sahajwalla V; Santana MFM; Snigirova A; Tuuri EM; Wilson SP; Ziajahromi S; Gillanders BM,
2025,
'A field and laboratory manual for sampling, processing and reporting microplastics in coastal and marine environments',
Frontiers in Marine Science,
12,
http://dx.doi.org/10.3389/fmars.2025.1674412 2025
Ghinangju B; Hossain R; Sahajwalla V,
2025,
'Unearthing waste resources: Nano-adsorbents from complex packaging waste for fluoride detoxification of water',
Journal of the American Ceramic Society,
108,
http://dx.doi.org/10.1111/jace.20132 2025
Salehi H; Maroufi S; Kh. Nekouei R; Chinu K; Sahajwalla V,
2025,
'Tailored separation of light rare earth elements using combined oxidative precipitation and multi-stage solvent extraction techniques',
Separation and Purification Technology,
364,
http://dx.doi.org/10.1016/j.seppur.2025.132566 2025
Salehi H; Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2025,
'Solvent extraction systems for selective isolation of light rare earth elements with high selectivity for Sm and La',
Rare Metals,
44,
pp. 2071 - 2084,
http://dx.doi.org/10.1007/s12598-024-03019-7 2025
Heriyanto ; Ghose A; Hossain R; Sahajwalla V,
2025,
'Novel upcycling of mixed textile waste into valuable activated carbon: A circular economy solution',
Resources Conservation and Recycling,
223,
http://dx.doi.org/10.1016/j.resconrec.2025.108526 2025
Sarmadi N; Pahlevani F; Udayakumar S; Biswal S; Pervez MF; Ulrich C; Chakraborty A; Bhattacharyya SK; Sahajwalla V,
2024,
'Correlative Analysis of Microstructural and Magnetic Characteristics of Dual-Phase High-Carbon Steel',
Advanced Engineering Materials,
26,
http://dx.doi.org/10.1002/adem.202300826 2024
Khayyam Nekouei R; Hajian-Foroushani M; Maroufi S; Sajjad SS; Akhter R; Biswal S; Bustamante H; Sahajwalla V,
2024,
'Microwave-assisted transforming of biosolids into engineered activated carbon employed for adsorption from wastewater',
Journal of Cleaner Production,
467,
http://dx.doi.org/10.1016/j.jclepro.2024.142941 2024
Biswal S; Pahlevani F; Wang W; Sahajwalla V,
2024,
'Reduction Behavior of Hematite-Biowaste Composite Pellets at Melting Temperature',
Steel Research International,
95,
http://dx.doi.org/10.1002/srin.202300454 2024
Sarkar M; Hossain R; Peng J; Sharma N; Sahajwalla V,
2024,
'Electrochemical Compatibility of Microzonal Carbon in Ion Uptake and Molecular Insights into Interphase Evolution for Next-Generation Li-Ion Batteries',
Advanced Energy Materials,
14,
http://dx.doi.org/10.1002/aenm.202401977 2024
Hasan MA; Hossain R; Sahajwalla V,
2024,
'Sustainable regeneration of cathode active materials from spent lithium-ion batteries by repurposing waste coffee powder',
Green Chemistry,
27,
pp. 1073 - 1088,
http://dx.doi.org/10.1039/d4gc05048g 2024
Khayyam Nekouei R; Maroufi S; S. Mofarah S; Sahajwalla V,
2024,
'Regeneration of waste Zn-MnO2 batteries: Value-added transformation to regenerate essential materials for sustainable battery manufacturing',
Journal of Energy Storage,
80,
http://dx.doi.org/10.1016/j.est.2023.110159 2024
Hossain R; Ghinangju BS; Biswal S; Schandl H; Sahajwalla V,
2024,
'Current technological options for recycling packaging waste: Challenges and opportunities in India',
Wiley Interdisciplinary Reviews Energy and Environment,
13,
http://dx.doi.org/10.1002/wene.500 2024
Hasan MA; Hossain R; Sahajwalla V,
2024,
'Utilization of battery waste derived ZnO in the removal of dye from aqueous solution: A waste to wealth approach',
Journal of Environmental Management,
356,
http://dx.doi.org/10.1016/j.jenvman.2024.120461 2024
Behera PR; Farzana R; Sahajwalla V,
2024,
'Production of Ni–Fe alloy by combined recycling of waste nickel-metal hydride batteries and waste toner powder',
Sustainable Materials and Technologies,
42,
http://dx.doi.org/10.1016/j.susmat.2024.e01175 2024
Hossain R; Sahajwalla V,
2024,
'Current recycling innovations to utilize e-waste in sustainable green metal manufacturing',
Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences,
382,
http://dx.doi.org/10.1098/rsta.2023.0239 2024
Sarkar M; Hossain R; Sahajwalla V,
2024,
'Sustainable recovery and resynthesis of electroactive materials from spent Li-ion batteries to ensure material sustainability',
Resources Conservation and Recycling,
200,
http://dx.doi.org/10.1016/j.resconrec.2023.107292 2024
Wesley C; Pahlevani F; Lemonnier A; Biswal S; Udayakumar S; Sahajwalla V,
2024,
'Never waste a crisis: Is leveraging the ‘cost of living crisis’ an opportunity for reducing overconsumption of clothing or just wishful thinking?',
Resources Conservation and Recycling,
203,
http://dx.doi.org/10.1016/j.resconrec.2023.107395 2024
Behera PR; Farzana R; Sahajwalla V,
2024,
'Preparation of 97% pure nickel-cobalt alloy from waste Ni-MH batteries by using waste glass as a fluxing agent',
Journal of Environmental Management,
369,
http://dx.doi.org/10.1016/j.jenvman.2024.122371 2024
Ubiç S; Nekouei RK; Sahajwalla V,
2024,
'A Two-Step Leaching Process Using Thiourea for the Recovery of Precious Metals from Waste Printed Circuit Boards',
Waste,
2,
pp. 312 - 336,
http://dx.doi.org/10.3390/waste2030018 2024
Payel S; Hasan MA; Pahlevani F; Prasher D; Ghose A; Sahajwalla V,
2024,
'From closet to contaminant to control: Unveiling microplastic sources in household textiles and potential for environmental application',
Journal of Water Process Engineering,
68,
http://dx.doi.org/10.1016/j.jwpe.2024.106400 2024
Siddika A; Kim T; Sahajwalla V; Hajimohammadi A,
2024,
'Early age structural build-up and pore stability in raw foam at ambient conditions: Implications for the final properties of glass-ceramic foam',
Construction and Building Materials,
428,
http://dx.doi.org/10.1016/j.conbuildmat.2024.136369 2024
Salehi H; Khayyam Nekouei R; Maroufi S; Sahajwalla V,
2024,
'Sustainable recovery of rare earth elements from Ni-MH batteries: Flux-free thermal isolation and Subsequent hydrometallurgical refinement',
Materials Today Sustainability,
27,
http://dx.doi.org/10.1016/j.mtsust.2024.100849 2024
Khayyam Nekouei R; Maroufi S; Salehi H; Sahajwalla V,
2024,
'Chemical isolation of rare earth elements (as pure rare earth oxides) from Nd-Fe-B magnets and Ni-MH batteries',
Journal of Environmental Chemical Engineering,
12,
http://dx.doi.org/10.1016/j.jece.2024.112596 2024
Hossain R; Sarkar M; Sahajwalla V,
2023,
'Technological options and design evolution for recycling spent lithium-ion batteries: Impact, challenges, and opportunities',
Wiley Interdisciplinary Reviews Energy and Environment,
12,
http://dx.doi.org/10.1002/wene.481 2023
Hemati S; Udayakumar S; Wesley C; Biswal S; Nur-A-Tomal MS; Sarmadi N; Pahlevani F; Sahajwalla V,
2023,
'Thermal Transformation of Secondary Resources of Carbon-Rich Wastes into Valuable Industrial Applications',
Journal of Composites Science,
7,
http://dx.doi.org/10.3390/jcs7010008 2023
Siddika A; Hajimohammadi A; Sahajwalla V,
2023,
'Alkali-activated foam: Understanding the relationship between rheology, activator-precursor interaction, and pore characteristics',
Construction and Building Materials,
409,
pp. 134111,
http://dx.doi.org/10.1016/j.conbuildmat.2023.134111 2023
Sahajwalla V; Hossain R,
2023,
'Rethinking circular economy for electronics, energy storage, and solar photovoltaics with long product life cycles',
MRS Bulletin,
48,
pp. 375 - 385,
http://dx.doi.org/10.1557/s43577-023-00519-2 2023
Wesley C; Pahlevani F; Nur-A-Tomal S; Biswal S; Sahajwalla V,
2023,
'An investigation into the minimum energy requirements for transforming end-of-life cotton textiles into carbon fibre in an Australian context',
Resources Conservation and Recycling Advances,
17,
http://dx.doi.org/10.1016/j.rcradv.2022.200123 2023
Salehi H; Maroufi S; Mofarah SS; Nekouei RK; Sahajwalla V,
2023,
'Recovery of rare earth metals from Ni-MH batteries: A comprehensive review',
Renewable and Sustainable Energy Reviews,
178,
http://dx.doi.org/10.1016/j.rser.2023.113248 2023
Shanker R; Khan D; Hossain R; Islam MT; Locock K; Ghose A; Sahajwalla V; Schandl H; Dhodapkar R,
2023,
'Plastic waste recycling: existing Indian scenario and future opportunities',
International Journal of Environmental Science and Technology,
20,
pp. 5895 - 5912,
http://dx.doi.org/10.1007/s13762-022-04079-x 2023
Anik Hasan M; Hossain R; Sahajwalla V,
2023,
'Critical metals (Lithium and Zinc) recovery from battery waste, ores, brine, and steel dust: A review',
Process Safety and Environmental Protection,
178,
pp. 976 - 994,
http://dx.doi.org/10.1016/j.psep.2023.08.069 2023
Nur-A-Tomal MS; Pahlevani F; Bhattacharyya S; Joe B; Wesley C; Sahajwalla V,
2023,
'Sustainable Transformation of Waste Soft Plastics into High-Quality Flexible Sheets',
Sustainability Switzerland,
15,
http://dx.doi.org/10.3390/su152316462 2023
Sarkar M; Hossain R; Sahajwalla V,
2023,
'Unravelling the properties of microzonal carbon from waste hard rubber by selective thermal transformation via conventional heating and microwave irradiation',
Carbon,
213,
http://dx.doi.org/10.1016/j.carbon.2023.118274 2023
Wesley C; Jiang C; Pahlevani F; Doolan C; Heriyanto ; Sahajwalla V,
2023,
'Utilising the microstructure of chemically and thermally activated waste textiles for noise attenuation in an urban Australian context',
Resources Conservation and Recycling,
197,
http://dx.doi.org/10.1016/j.resconrec.2023.107112 2023
Hemati S; Biswal S; Pahlevani F; Udayakumar S; Sahajwalla V,
2023,
'Degradation Kinetics of Automotive Shredder Residue and Waste Automotive Glass for SiC Synthesis: An Energy-Efficient Approach',
Crystals,
13,
http://dx.doi.org/10.3390/cryst13081183 2023
Saleem H; Khosravi M; Maroufi S; Sahajwalla V; O'Mullane AP,
2022,
'Repurposing metal containing wastes and mass-produced materials as electrocatalysts for water electrolysis',
Sustainable Energy and Fuels,
6,
pp. 4829 - 4844,
http://dx.doi.org/10.1039/d2se01068b 2022
Khayyam Nekouei R; S. Mofarah S; Maroufi S; Tudela I; Sahajwalla V,
2022,
'Determination of the optimum potential window for super- and pseudocapacitance electrodes via in-depth electrochemical impedance spectroscopy analysis',
Journal of Energy Storage,
56,
http://dx.doi.org/10.1016/j.est.2022.106137 2022
Islam MT; Huda N; Baumber A; Hossain R; Sahajwalla V,
2022,
'Waste battery disposal and recycling behavior: a study on the Australian perspective',
Environmental Science and Pollution Research,
29,
pp. 58980 - 59001,
http://dx.doi.org/10.1007/s11356-022-19681-2 2022
Hossain R; Islam MT; Ghose A; Sahajwalla V,
2022,
'Full circle: Challenges and prospects for plastic waste management in Australia to achieve circular economy',
Journal of Cleaner Production,
368,
http://dx.doi.org/10.1016/j.jclepro.2022.133127 2022
Hossain R; Islam MT; Shanker R; Khan D; Locock KES; Ghose A; Schandl H; Dhodapkar R; Sahajwalla V,
2022,
'Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy',
Sustainability Switzerland,
14,
http://dx.doi.org/10.3390/su14084425 2022
Assefi M; S. Mofarah S; Maroufi S; Khayyam Nekouei R; Wang W; Kert E; Sahajwalla V,
2022,
'Regeneration of hydrogen through thermal micronisation of end-of-life polymers for sustainable reduction of iron oxide',
Fuel Processing Technology,
226,
http://dx.doi.org/10.1016/j.fuproc.2021.107038 2022
Hossain R; Sahajwalla V,
2022,
'Microrecycled Co3O4from waste lithium-ion battery: Synthesis, characterisation and implication in environmental application',
Journal of Environmental Chemical Engineering,
10,
http://dx.doi.org/10.1016/j.jece.2022.107858 2022
Vijayan SK; Sahajwalla V; Bhattacharya S,
2022,
'Insights into the options of energy and metal recovery from automotive shredder residue: A review',
Resources Conservation and Recycling Advances,
15,
http://dx.doi.org/10.1016/j.rcradv.2022.200097 2022
Echeverria C; Pahlevani F; Sahajwalla V,
2022,
'Effect of temperature, holding time and gas atmospheres in the synthesis and evolution of polymer-derived nanoceramics: A pyrometallurgical approach to precision nanorecycling of multiphase microplastics',
Journal of Cleaner Production,
380,
http://dx.doi.org/10.1016/j.jclepro.2022.134883 2022
Khayyam Nekouei R; S. Mofarah S; Maroufi S; Wang W; Mansuri I; Sahajwalla V,
2022,
'Unraveling the Role of Oxides in Electrochemical Performance of Activated Carbons for High Voltage Symmetric Electric Double-Layer Capacitors',
Advanced Energy and Sustainability Research,
3,
http://dx.doi.org/10.1002/aesr.202100130 2022
Siddika A; Hajimohammadi A; Sahajwalla V,
2022,
'Powder sintering and gel casting methods in making glass foam using waste glass: A review on parameters, performance, and challenges',
Ceramics International,
48,
pp. 1494 - 1511,
http://dx.doi.org/10.1016/j.ceramint.2021.10.066 2022
Nur-A-Tomal MS; Pahlevani F; Sahajwalla V,
2022,
'Study on the Direct Transformation of Milk Bottle and Wood into Wood–Plastic Composite through Injection Molding',
Journal of Composites Science,
6,
http://dx.doi.org/10.3390/jcs6080230 2022
Hassan K; Hossain R; Sahajwalla V,
2022,
'Recycled ZnO-fused macroporous 3D graphene oxide aerogel composites for high-performance asymmetric supercapacitors',
Journal of the American Ceramic Society,
http://dx.doi.org/10.1111/jace.18697 2022
Nur-A-Tomal MS; Biswal S; Pahlevani F; Sahajwalla V,
2022,
'Recycling tannery solid wastes as an alternative carbon resource for ironmaking',
Journal of Material Cycles and Waste Management,
24,
pp. 2030 - 2040,
http://dx.doi.org/10.1007/s10163-022-01465-y 2022
Khayyam Nekouei R; Mofarah S; Hossein R; Maroufi S; Sahajwalla V,
2022,
'Roles of experimental variables in optimised fabrication of microrecycled CuO-based photoelectrodes',
Materials Today Sustainability,
18,
http://dx.doi.org/10.1016/j.mtsust.2022.100111 2022
Hossain R; Nekouei RK; Al Mahmood A; Sahajwalla V,
2022,
'Value-added fabrication of NiO-doped CuO nanoflakes from waste flexible printed circuit board for advanced photocatalytic application',
Scientific Reports,
12,
http://dx.doi.org/10.1038/s41598-022-16614-4 2022
Maroufi S; Mofarah SS; Khayyam Nekouei R; Sahajwalla V,
2022,
'Tailoring of a highly stable Mn1−x−y(CexLay)O2−δ pseudocapacitor thin-film and rare earth oxide nanospheres through selective purification of rare earth oxides derived from Ni-MH batteries',
Green Chemistry,
24,
pp. 1659 - 1672,
http://dx.doi.org/10.1039/d1gc02802b 2022
Hossain R; Hassan K; Sahajwalla V,
2022,
'Utilising problematic waste to detect toxic gas release in the environment: fabricating a NiO doped CuO nanoflake based ammonia sensor from e-waste',
Nanoscale Advances,
4,
pp. 4066 - 4079,
http://dx.doi.org/10.1039/d1na00743b 2022
Siddika A; Hajimohammadi A; Sahajwalla V,
2022,
'Stabilisation of pores in glass foam by using a modified curing-sintering process: sustainable recycling of automotive vehicles’ waste glass',
Resources Conservation and Recycling,
179,
http://dx.doi.org/10.1016/j.resconrec.2021.106145 2022
Biswal S; Pahlevani F; Sahajwalla V,
2021,
'Synthesis of Value-Added Ferrous Material from Electric Arc Furnace (EAF) Slag and Spent Coffee Grounds',
JOM,
73,
pp. 1878 - 1888,
http://dx.doi.org/10.1007/s11837-021-04678-y 2021
Siddika A; Hajimohammadi A; Ferdous W; Sahajwalla V,
2021,
'Roles of waste glass and the effect of process parameters on the properties of sustainable cement and geopolymer concrete—a state-of-the-art review',
Polymers,
13,
pp. 3935,
http://dx.doi.org/10.3390/polym13223935 2021
Hassan K; Hossain R; Farzana R; Sahajwalla V,
2021,
'Microrecycled zinc oxide nanoparticles (ZnO NP) recovered from spent Zn–C batteries for VOC detection using ZnO sensor',
Analytica Chimica Acta,
1165,
http://dx.doi.org/10.1016/j.aca.2021.338563 2021
Kumar R; Soam A; Sahajwalla V,
2021,
'Carbon coated cobalt oxide (CC-CO3O4) as electrode material for supercapacitor applications',
Materials Advances,
2,
pp. 2918 - 2923,
http://dx.doi.org/10.1039/d1ma00120e 2021
Hossain R; Al Mahmood A; Sahajwalla V,
2021,
'Recovering renewable carbon materials from automotive shredder residue (ASR) for micro-supercapacitor electrodes',
Journal of Cleaner Production,
304,
http://dx.doi.org/10.1016/j.jclepro.2021.127131 2021
Djuandhi L; Gaikwad V; Cowie BCC; Sahajwalla V; Sharma N,
2021,
'Repurposing Waste Tires as Tunable Frameworks for Use in Sodium-Ion and Lithium-Sulfur Batteries',
ACS Sustainable Chemistry and Engineering,
9,
pp. 6972 - 6990,
http://dx.doi.org/10.1021/acssuschemeng.1c00502 2021
Khayyam Nekouei R; Tudela I; Mofarah SS; Vahidi E; Maroufi S; Wang K; Pahlevani F; Sahajwalla V,
2021,
'Dual functionality of mixed Cu-based two-dimensional (2D) heterostructures derived from electronic waste',
Green Chemistry,
23,
pp. 5511 - 5523,
http://dx.doi.org/10.1039/d1gc00354b 2021
Echeverria CA; Pahlevani F; Lim S; Sahajwalla V,
2021,
'Synthesis and characterization of biomorphic 1D-SiC nanoceramics from novel macroalga precursor material',
Journal of Cleaner Production,
312,
pp. 127808,
http://dx.doi.org/10.1016/j.jclepro.2021.127808 2021
Maroufi S; Khayyam Nekouei R; S. Mofarah S; O'Mullane AP; Yao Y; Lim S; Cazorla C; Sahajwalla V,
2021,
'Transparent and Flexible Mn1−x−y(CexLay)O2−δ Ultrathin-Film Device for Highly-Stable Pseudocapacitance Application',
Advanced Functional Materials,
31,
http://dx.doi.org/10.1002/adfm.202100880 2021
Babasafari Z; Pan AV; Pahlevani F; Kong C; Sahajwalla V; du Toit M; Dippenaar R,
2021,
'Effect of silicon and partitioning temperature on the microstructure and mechanical properties of high-carbon steel in a quenching and partitioning heat treatment',
Journal of Materials Science,
56,
pp. 15423 - 15440,
http://dx.doi.org/10.1007/s10853-021-06270-w 2021
Maroufi S; Khayyam Nekouei R; S. Mofarah S; O'Mullane AP; Yao Y; Lim S; Cazorla C; Sahajwalla V,
2021,
'Anionic Intercalation: Transparent and Flexible Mn1−x−y(CexLay)O2−δ Ultrathin‐Film Device for Highly‐Stable Pseudocapacitance Application (Adv. Funct. Mater. 30/2021)',
Advanced Functional Materials,
31,
http://dx.doi.org/10.1002/adfm.202170221 2021
Islam MT; Huda N; Baumber A; Shumon R; Zaman A; Ali F; Hossain R; Sahajwalla V,
2021,
'A global review of consumer behavior towards e-waste and implications for the circular economy',
Journal of Cleaner Production,
316,
http://dx.doi.org/10.1016/j.jclepro.2021.128297 2021
Khayyam Nekouei R; S. Mofarah S; Maroufi S; Cazorla C; O'Mullane AP; Yao Y; Lim S; Tricoli A; Sahajwalla V,
2021,
'Self-adhesive flexible patches of oxide heterojunctions with tailored band alignments for electrocatalytic H2O2generation',
Journal of Materials Chemistry A,
9,
pp. 26727 - 26740,
http://dx.doi.org/10.1039/d1ta06473h 2021
Hemati S; Hossain R; Sahajwalla V,
2021,
'Selective thermal transformation of automotive shredder residues into high-value nano silicon carbide',
Nanomaterials,
11,
http://dx.doi.org/10.3390/nano11112781 2021
Rezaei M; Zarei-Hanzaki A; Anousheh AS; Abedi HR; Pahlevani F; Hossain R; Sahajwalla V; Berto F,
2021,
'On the damage mechanisms during compressive dwell-fatigue of β-annealed Ti-6242S alloy',
International Journal of Fatigue,
146,
http://dx.doi.org/10.1016/j.ijfatigue.2021.106158 2021
Djuandhi L; Gaikwad V; Wang W; Cowie BCC; Barghamadi M; Sahajwalla V; Sharma N,
2021,
'Pyrolysed coffee grounds as a conductive host agent for sulfur composite electrodes in Li–S batteries',
Carbon Trends,
4,
http://dx.doi.org/10.1016/j.cartre.2021.100053 2021
Yunos NFM; Ismail AN; Munusamy SRR; Idris MA; Sahajwalla V,
2021,
'Reaction Kinetics of Palm Char and Coke with Iron Oxides in EAF Steelmaking Slag',
Journal of Sustainable Metallurgy,
7,
pp. 412 - 426,
http://dx.doi.org/10.1007/s40831-021-00342-6 2021
Mofarah SS; Khayyam Nekouei R; Maroufi S; Biswal S; Lim S; Yao Y; Sahajwalla V,
2021,
'Controllable design of defect-rich hybrid iron oxide nanostructures on mesoporous carbon-based scaffold for pseudocapacitive applications',
Nanoscale,
13,
pp. 3662 - 3672,
http://dx.doi.org/10.1039/d0nr06880b 2021
Handoko W; Pahlevani F; Yao Y; Privat K; Sahajwalla V,
2021,
'Characterization of Waste-Integrated Multi-hybrid Structure for Enhancing Corrosion Resistance of High-Carbon Steel',
Journal of Sustainable Metallurgy,
7,
pp. 166 - 177,
http://dx.doi.org/10.1007/s40831-020-00330-2 2021
Yin S; Wang Y; Kong C; Gong B; Marjo CE; Sahajwalla V,
2021,
'Mechanistic Evaluation of Single-Crystalline Aluminum Nitride Nanowire Synthesis from Plastic Waste',
ACS Sustainable Chemistry and Engineering,
9,
pp. 2291 - 2299,
http://dx.doi.org/10.1021/acssuschemeng.0c08348 2021
Mahmood AA; Hossain R; Bhattacharyya S; Privat K; Sahajwalla V; Al Mahmood MA,
2021,
'Rapid transformation of the metal-polymer laminated packaging materials into ceramic carbide reinforced Al-alloy',
Resources Conservation and Recycling,
167,
pp. 105374,
http://dx.doi.org/10.1016/j.resconrec.2020.105374 2021
Nur-A-Tomal MS; Pahlevani F; Handoko W; Cholake ST; Sahajwalla V,
2021,
'Effect of cyclic reprocessing on nylon 12 under injection molding: working toward more efficient recycling of plastic waste',
Materials Today Sustainability,
11-12,
http://dx.doi.org/10.1016/j.mtsust.2020.100056 2021
Hossain R; Nekouei RK; Mansuri I; Sahajwalla V,
2021,
'In-situ O/N-heteroatom enriched activated carbon by sustainable thermal transformation of waste coffee grounds for supercapacitor material',
Journal of Energy Storage,
33,
http://dx.doi.org/10.1016/j.est.2020.102113 2021
Hassan K; Hossain R; Sahajwalla V,
2021,
'Novel microrecycled ZnO nanoparticles decorated macroporous 3D graphene hybrid aerogel for efficient detection of NO2 at room temperature',
Sensors and Actuators B Chemical,
330,
http://dx.doi.org/10.1016/j.snb.2020.129278 2021
Hossain R; Sahajwalla V,
2021,
'Microrecycling of waste flexible printed circuit boards for in-situ generation of O- and N-doped activated carbon with outstanding supercapacitance performance',
Resources Conservation and Recycling,
167,
http://dx.doi.org/10.1016/j.resconrec.2020.105221 2021
Echeverria CA; Ozkan J; Pahlevani F; Willcox M; Sahajwalla V,
2021,
'Effect of hydrothermal hot-compression method on the antimicrobial performance of green building materials from heterogeneous cellulose wastes',
Journal of Cleaner Production,
280,
pp. 124377,
http://dx.doi.org/10.1016/j.jclepro.2020.124377 2021
Hossain R; Al Mahmood A; Sahajwalla V,
2021,
'Facile Solution for Recycling Hazardous Flexible Plastic-Laminated Metal Packaging Waste to Produce Value-Added Metal Alloys',
ACS Sustainable Chemistry and Engineering,
9,
pp. 16881 - 16895,
http://dx.doi.org/10.1021/acssuschemeng.1c04368 2021
Nekouei RK; Maroufi S; Assefi M; Pahlevani F; Sahajwalla V,
2020,
'Thermal isolation of a clean alloy from waste slag and polymeric residue of electronic waste',
Processes,
8,
http://dx.doi.org/10.3390/pr8010053 2020
Kumar R; Soam A; Sahajwalla V, 2020, 'Sucrose-derived carbon-coated nickel oxide (SDCC-NiO) as an electrode material for supercapacitor applications', Materials Advances, 1, pp. 609 - 616
2020
Haque E; Pahlevani F; Gorjizadeh N; Hossain R; Sahajwalla V,
2020,
'Thermal transformation of end-of-life latex to valuable materials',
Journal of Composites Science,
4,
pp. 166,
http://dx.doi.org/10.3390/jcs4040166 2020
Babasafari Z; Pan AV; Pahlevani F; Hossain R; Sahajwalla V; Du Toit M; Dippenaar R,
2020,
'Effects of austenizing temperature, cooling rate and isothermal temperature on overall phase transformation characteristics in high carbon steel',
Journal of Materials Research and Technology,
9,
pp. 15286 - 15297,
http://dx.doi.org/10.1016/j.jmrt.2020.10.071 2020
Maroufi S; Assefi M; Khayyam Nekouei R; Sahajwalla V,
2020,
'Recovery of lithium and cobalt from waste lithium-ion batteries through a selective isolation-suspension approach',
Sustainable Materials and Technologies,
23,
http://dx.doi.org/10.1016/j.susmat.2019.e00139 2020
Biswal S; Pahlevani F; Bhattacharyya SK; Sahajwalla V,
2020,
'A novel reforming approach of utilizing spent coffee grounds to produce iron',
Resources Conservation and Recycling,
163,
pp. 105067,
http://dx.doi.org/10.1016/j.resconrec.2020.105067 2020
Jin X; Foller T; Wen X; Ghasemian MB; Wang F; Zhang M; Bustamante H; Sahajwalla V; Kumar P; Kim H; Lee G; Kalantar‐Zadeh K; Joshi R; Kalantar Zadeh K,
2020,
'Effective Separation of CO
2
Using Metal‐Incorporated rGO Membranes',
Advanced Materials,
32,
pp. 1907580 - 1907580,
http://dx.doi.org/10.1002/adma.201907580 2020
Kumar R; Singh BK; Soam A; Parida S; Sahajwalla V; Bhargava P,
2020,
'In situ carbon-supported titanium dioxide (ICS-TiO2) as an electrode material for high performance supercapacitors',
Nanoscale Advances,
2,
pp. 2376 - 2386,
http://dx.doi.org/10.1039/d0na00014k 2020
Assefi M; Maroufi S; Yamauchi Y; Sahajwalla V,
2020,
'Pyrometallurgical recycling of Li-ion, Ni–Cd and Ni–MH batteries: A minireview',
Current Opinion in Green and Sustainable Chemistry,
24,
pp. 26 - 31,
http://dx.doi.org/10.1016/j.cogsc.2020.01.005 2020
Garole DJ; Hossain R; Garole VJ; Sahajwalla V; Nerkar J; Dubal DP,
2020,
'Recycle, Recover and Repurpose Strategy of Spent Li-ion Batteries and Catalysts: Current Status and Future Opportunities',
Chemsuschem,
13,
pp. 3079 - 3100,
http://dx.doi.org/10.1002/cssc.201903213 2020
Al Mahmood A; Hossain R; Sahajwalla V; Al Mahmood MA,
2020,
'Investigation of the effect of laminated polymers in the metallic packaging materials on the recycling of aluminum by thermal disengagement technology (TDT)',
Journal of Cleaner Production,
274,
pp. 122541,
http://dx.doi.org/10.1016/j.jclepro.2020.122541 2020
Park TJ; Ko KH; Lee JH; Gupta S; Sahajwalla V; Kim BC,
2020,
'Coke Size Degradation and Its Reactivity Across the Tuyere Regions in a Large-Scale Blast Furnace of Hyundai Steel',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
51,
pp. 1282 - 1288,
http://dx.doi.org/10.1007/s11663-020-01806-y 2020
Tanaka Y; Pahlevani F; Kitamura SY; Privat K; Sahajwalla V,
2020,
'Behaviour of Sulphide and Non-alumina-Based Oxide Inclusions in Ca-Treated High-Carbon Steel',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
51,
pp. 1384 - 1394,
http://dx.doi.org/10.1007/s11663-020-01872-2 2020
Echeverria C; Ozkan J; Pahlevani F; Willcox M; Sahajwalla V,
2020,
'Multifunctional marine bio-additive with synergistic effect for non-toxic flame-retardancy and anti-microbial performance',
Sustainable Materials and Technologies,
25,
pp. e00199,
http://dx.doi.org/10.1016/j.susmat.2020.e00199 2020
Farzana R; Sayeed MA; Joseph J; Ostrikov K; O'Mullane AP; Sahajwalla V,
2020,
'Manganese Oxide Derived from a Spent Zn–C Battery as a Catalyst for the Oxygen Evolution Reaction',
Chemelectrochem,
7,
pp. 2073 - 2080,
http://dx.doi.org/10.1002/celc.202000422 2020
Behera PR; Farzana R; Sahajwalla V,
2020,
'Reduction of oxides obtained from waste Ni-MH battery's positive electrode using waste plastics to produce nickel based alloy',
Journal of Cleaner Production,
http://dx.doi.org/10.1016/j.jclepro.2019.119407 2020
Hossain R; Sahajwalla V,
2020,
'Material Microsurgery: Selective Synthesis of Materials via High-Temperature Chemistry for Microrecycling of Electronic Waste',
ACS Omega,
5,
pp. 17062 - 17070,
http://dx.doi.org/10.1021/acsomega.0c00485 2020
Hossain R; Pahlevani F; Sahajwalla V,
2020,
'Revealing the mechanism of extraordinary hardness without compensating the toughness in a low alloyed high carbon steel',
Scientific Reports,
10,
pp. 181,
http://dx.doi.org/10.1038/s41598-019-55803-6 2020
Kumar R; Soam A; Hussain R; Mansuri I; Sahajwalla V,
2020,
'Carbon coated iron oxide (CC-IO) as high performance electrode material for supercapacitor applications',
Journal of Energy Storage,
32,
http://dx.doi.org/10.1016/j.est.2020.101737 2020
Khayyam Nekouei R; Tudela I; Pahlevani F; Sahajwalla V,
2020,
'Current trends in direct transformation of waste printed circuit boards (WPCBs) into value-added materials and products',
Current Opinion in Green and Sustainable Chemistry,
24,
pp. 14 - 20,
http://dx.doi.org/10.1016/j.cogsc.2020.01.003 2020
Echeverria CA; Pahlevani F; Sahajwalla V,
2020,
'Valorisation of discarded nonwoven polypropylene as potential matrix-phase for thermoplastic-lignocellulose hybrid material engineered for building applications',
Journal of Cleaner Production,
258,
http://dx.doi.org/10.1016/j.jclepro.2020.120730 2020
Kan WH; Huang S; Man Z; Handoko W; Chang L; Pahlevani F; Rasmussen K; Sahajwalla V,
2020,
'Utilization of Waste Materials for the Manufacturing of Better-Quality Wear and Corrosion-Resistant Steels',
Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science,
51,
pp. 2404 - 2410,
http://dx.doi.org/10.1007/s11661-020-05686-4 2020
Al Mahmood A; Hossain R; Bhattacharyya S; Sahajwalla V; Al Mahmood MA,
2020,
'Recycling of polymer laminated aluminum packaging (PLAP) materials into carbonaceous metallic microparticles',
Journal of Cleaner Production,
269,
pp. 122157,
http://dx.doi.org/10.1016/j.jclepro.2020.122157 2020
Handoko W; Pahlevani F; Sahajwalla V,
2020,
'Comparison on corrosion performance of waste-based multi-hybrid structure high carbon steel and high Cr cast steel',
SN Applied Sciences,
2,
http://dx.doi.org/10.1007/s42452-020-03629-7 2020
Heo JH; Kim TS; Sahajwalla V; Park JH,
2020,
'Observations of FeO Reduction in Electric Arc Furnace Slag by Aluminum Black Dross: Effect of CaO Fluxing on Slag Morphology',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
51,
pp. 1201 - 1210,
http://dx.doi.org/10.1007/s11663-020-01840-w 2020
Van Yken J; Cheng KY; Boxall NJ; Nikoloski AN; Moheimani N; Valix M; Sahajwalla V; Kaksonen AH,
2020,
'Potential of metals leaching from printed circuit boards with biological and chemical lixiviants',
Hydrometallurgy,
196,
http://dx.doi.org/10.1016/j.hydromet.2020.105433 2020
Nur-A-Tomal MS; Pahlevani F; Sahajwalla V,
2020,
'Direct transformation of waste children's toys to high quality products using 3D printing: A waste-to-wealth and sustainable approach',
Journal of Cleaner Production,
267,
pp. 122188,
http://dx.doi.org/10.1016/j.jclepro.2020.122188 2020
Mayyas M; Sahajwalla V,
2019,
'Carbon nano-sponge with enhanced electrochemical properties: A new understanding of carbon activation',
Chemical Engineering Journal,
358,
pp. 980 - 991,
http://dx.doi.org/10.1016/j.cej.2018.10.094 2019
Hassan K; Farzana R; Sahajwalla V,
2019,
'In-situ fabrication of ZnO thin film electrode using spent Zn–C battery and its electrochemical performance for supercapacitance',
SN Applied Sciences,
1,
http://dx.doi.org/10.1007/s42452-019-0302-1 2019
Kumar R; Sahajwalla V; Bhargava P,
2019,
'Fabrication of a counter electrode for dye-sensitized solar cells (DSSCs) using a carbon material produced with the organic ligand 2-methyl-8-hydroxyquinolinol (Mq)',
Nanoscale Advances,
1,
pp. 3192 - 3199,
http://dx.doi.org/10.1039/c9na00206e 2019
Heriyanto ; Pahlevani F; Sahajwalla V,
2019,
'Effect of glass aggregates and coupling agent on the mechanical behaviour of polymeric glass composite',
Journal of Cleaner Production,
227,
pp. 119 - 129,
http://dx.doi.org/10.1016/j.jclepro.2019.04.152 2019
Heriyanto ; Pahlevani F; Sahajwalla V,
2019,
'Effect of different waste filler and silane coupling agent on the mechanical properties of powder-resin composite',
Journal of Cleaner Production,
224,
pp. 940 - 956,
http://dx.doi.org/10.1016/j.jclepro.2019.03.269 2019
Handoko W; Anurag A; Pahlevani F; Hossain R; Privat K; Sahajwalla V,
2019,
'Effect of selective-precipitations process on the corrosion resistance and hardness of dual-phase high-carbon steel',
Scientific Reports,
9,
pp. 15631,
http://dx.doi.org/10.1038/s41598-019-52228-z 2019
Handoko W; Pahlevani F; Yao Y; Privat K; Sahajwalla V,
2019,
'From Waste to Multi-Hybrid Layering of High Carbon Steel to Improve Corrosion Resistance: An In-Depth Analysis Using EPMA and AFM Techniques',
Surfaces,
2,
pp. 485 - 496,
http://dx.doi.org/10.3390/surfaces2030036 2019
Handoko W; Pahlevani F; Sahajwalla V,
2019,
'Enhancing corrosion resistance of high-carbon steel by formation of surface layers using wastes as input',
Metals,
9,
pp. 902,
http://dx.doi.org/10.3390/met9080902 2019
Handoko W; Pahlevani F; Sahajwalla V,
2019,
'Effect of austenitisation temperature on corrosion resistance properties of dual-phase high-carbon steel',
Journal of Materials Science,
54,
pp. 13775 - 13786,
http://dx.doi.org/10.1007/s10853-019-03859-0 2019
Handoko W; Pahlevani F; Hossain R; Sahajwalla V,
2019,
'Stress-Induced Phase Transformation and Its Correlation with Corrosion Properties of Dual-Phase High Carbon Steel',
Journal of Manufacturing and Materials Processing,
3,
pp. 55 - 55,
http://dx.doi.org/10.3390/jmmp3030055 2019
Echeverria C; Handoko W; Pahlevani F; Sahajwalla V,
2019,
'Cascading use of textile waste for the advancement of fibre reinforced
composites for building applications',
Journal of Cleaner Production,
208,
pp. 1524 - 1536,
http://dx.doi.org/10.1016/j.jclepro.2018.10.227 2019
Assefi M; Maroufi S; Yamauchi Y; Sahajwalla V,
2019,
'Core-Shell Nanocatalysts of Co3O4 and NiO Shells from New (Discarded) Resources: Sustainable Recovery of Cobalt and Nickel from Spent Lithium-Ion Batteries, Ni-Cd Batteries, and LCD Panel',
ACS Sustainable Chemistry and Engineering,
7,
pp. 19005 - 19014,
http://dx.doi.org/10.1021/acssuschemeng.9b04618 2019
Assefi M; Maroufi S; Sahajwalla V,
2019,
'Recycling of the scrap LCD panels by converting into the InBO3 nanostructure product',
Environmental Science and Pollution Research,
26,
pp. 36287 - 36295,
http://dx.doi.org/10.1007/s11356-019-06682-x 2019
Kumar U; Goonetilleke D; Gaikwad V; Pramudita JC; Joshi RK; Sharma N; Sahajwalla V,
2019,
'Activated Carbon from E-Waste Plastics as a Promising Anode for Sodium-Ion Batteries',
ACS Sustainable Chemistry and Engineering,
7,
pp. 10310 - 10322,
http://dx.doi.org/10.1021/acssuschemeng.9b00135 2019
Hossain R; Pahlevani F; Sahajwalla V,
2019,
'Stability of retained austenite in high carbon steel – Effect of post-tempering heat treatment',
Materials Characterization,
149,
pp. 239 - 247,
http://dx.doi.org/10.1016/j.matchar.2019.01.034 2019
Khayyam Nekouei R; Pahlevani F; Golmohammadzadeh R; Assefi M; Rajarao R; Chen YH; Sahajwalla V,
2019,
'Recovery of heavy metals from waste printed circuit boards: statistical optimization of leaching and residue characterization',
Environmental Science and Pollution Research,
26,
pp. 24417 - 24429,
http://dx.doi.org/10.1007/s11356-019-05596-y 2019
Banerjee A; Hossain R; Pahlevani F; Zhu Q; Sahajwalla V; Prusty BG,
2019,
'Strain-rate-dependent deformation behaviour of high-carbon steel in compression: mechanical and structural characterisation',
Journal of Materials Science,
54,
pp. 6594 - 6607,
http://dx.doi.org/10.1007/s10853-018-03301-x 2019
Banerjee A; Gangadhara Prusty B; Zhu Q; Pahlevani F; Sahajwalla V; Prusty G,
2019,
'Strain-Rate-Dependent Deformation Behavior of High-Carbon Steel under Tensile–Compressive Loading',
JOM,
71,
pp. 2757 - 2769,
http://dx.doi.org/10.1007/s11837-019-03594-6 2019
Yin S; Rajarao R; Sahajwalla V,
2019,
'Thermal Transformation of Metallized Plastic Packaging Waste into Value-Added Al/Al 3 C 4 /AlN Resources',
ACS Sustainable Chemistry and Engineering,
7,
pp. 1723 - 1733,
http://dx.doi.org/10.1021/acssuschemeng.8b05503 2019
Khayyam Nekouei R; Pahlevani F; Mayyas M; Maroufi S; Sahajwalla V,
2019,
'Direct transformation of waste printed circuit boards into high surface area t-SnO2 for photocatalytic dye degradation',
Journal of Environmental Chemical Engineering,
7,
http://dx.doi.org/10.1016/j.jece.2019.103133 2019
Hossain R; Pahlevani F; Cholake ST; Privat K; Sahajwalla V,
2019,
'Innovative Surface Engineering of High-Carbon Steel through Formation of Ceramic Surface and Diffused Subsurface Hybrid Layering',
ACS Sustainable Chemistry and Engineering,
7,
pp. 9228 - 9236,
http://dx.doi.org/10.1021/acssuschemeng.9b00051 2019
Nekouei RK; Pahlevani F; Assefi M; Maroufi S; Sahajwalla V,
2019,
'Selective isolation of heavy metals from spent electronic waste solution by macroporous ion-exchange resins',
Journal of Hazardous Materials,
371,
pp. 389 - 396,
http://dx.doi.org/10.1016/j.jhazmat.2019.03.013 2019
Al Mahmood A; Hossain R; Sahajwalla V; Al Mahmood MA,
2019,
'Microrecycling of the metal–polymer-laminated packaging materials via thermal disengagement technology',
SN Applied Sciences,
1,
pp. 1106,
http://dx.doi.org/10.1007/s42452-019-1099-7 2019
Echeverria C; Pahlevani F; Sahajwalla V,
2019,
'Mechanical particle size reduction methods as potential interfacial optimization alternative for a low-carbon particulate reinforced marine bio-composite',
Journal of Cleaner Production,
221,
pp. 509 - 525,
http://dx.doi.org/10.1016/j.jclepro.2019.02.265 2019
Echeverria Encina C; Handoko W; Pahlevani F; Jiang C; Doolan C; Sahajwalla V,
2019,
'Engineered hybrid fibre reinforced composites for sound absorption building applications',
Resources, Conservation and Recycling,
143,
pp. 1 - 14,
http://dx.doi.org/10.1016/j.resconrec.2018.12.014 2019
Mayyas M; Nekouei RK; Sahajwalla V,
2019,
'Valorization of lignin biomass as a carbon feedstock in steel industry: Iron oxide reduction, steel carburizing and slag foaming',
Journal of Cleaner Production,
219,
pp. 971 - 980,
http://dx.doi.org/10.1016/j.jclepro.2019.02.114 2019
Singla I; Kumar H; Pahlevani F; Handoko W; Cholake ST; Hossain R; Sahajwalla V,
2019,
'From waste to surface modification of aluminum bronze using selective surface diffusion process',
Scientific Reports,
9,
pp. 1559,
http://dx.doi.org/10.1038/s41598-018-38120-2 2019
Hossain R; Nekouei RK; Mansuri I; Sahajwalla V; Khayyam Nekouei R,
2019,
'Sustainable Recovery of Cu and Sn from Problematic Global Waste: Exploring Value from Waste Printed Circuit Boards',
ACS Sustainable Chemistry and Engineering,
7,
pp. 1006 - 1017,
http://dx.doi.org/10.1021/acssuschemeng.8b04657 2019
Yin S; Rajarao R; Gong B; Wang Y; Kong C; Sahajwalla V,
2019,
'Thermo-delamination of metallised composite plastic: An innovative approach to generate Aluminium from packaging plastic waste',
Journal of Cleaner Production,
211,
pp. 321 - 329,
http://dx.doi.org/10.1016/j.jclepro.2018.11.158 2019
Handoko W; Pahlevani F; Sahajwalla V,
2018,
'The Effect of Low-Quantity Cr Addition on the Corrosion Behaviour of Dual-Phase High Carbon Steel',
Metals,
8,
pp. 1 - 12,
http://dx.doi.org/10.3390/met8040199 2018
Tanaka Y; Pahlevani F; Sahajwalla V,
2018,
'Agglomeration Behavior of Non-Metallic Particles on the Surface of Ca-Treated High-Carbon Liquid Steel: An In Situ Investigation',
Metals,
8,
pp. 176,
http://dx.doi.org/10.3390/met8030176 2018
Farzana R; rajarao ; mansuri ; sahajwalla ,
2018,
'Sustainable synthesis of silicon nitride nanowires using waste carbon fibre reinforced polymer (CFRP)',
Journal of Cleaner Production,
188,
pp. 371 - 377,
http://dx.doi.org/10.1016/j.jclepro.2018.03.295 2018
Park H; Sohn I; Tsalapatis J; Sahajwalla V,
2018,
'Reduction Behavior of Dolomite-Fluxed Magnetite: Coke Composite Pellets at 1573 K (1300 °C)',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
49,
pp. 1109 - 1118,
http://dx.doi.org/10.1007/s11663-018-1208-9 2018
Gaikwad V; Ghose A; Cholake S; Rawal A; Iwato M; Sahajwalla V,
2018,
'Transformation of E-Waste Plastics into Sustainable Filaments for 3D Printing',
ACS Sustainable Chemistry and Engineering,
6,
pp. 14432 - 14440,
http://dx.doi.org/10.1021/acssuschemeng.8b03105 2018
Rajarao R; Farzana R; Sahajwalla V,
2018,
'Transforming Waste Printed Circuit Boards and Compact Discs for the Synthesis of Valuable Ferrosilicon Alloy',
Journal of Sustainable Metallurgy,
4,
pp. 461 - 469,
http://dx.doi.org/10.1007/s40831-018-0194-0 2018
You Y; Cholake S; Yoshimura M; Lee GH; Sahajwalla V; Joshi R,
2018,
'A controlled carburization process to obtain graphene-Fe3C-Fe composites',
Advanced Materials Interfaces,
5,
http://dx.doi.org/10.1002/admi.201800599 2018
mansuri ; Farzana R; rajarao ; sahajwalla , 2018, 'Carbon Dissolution Using Waste Biomass—A Sustainable Approach for Iron-Carbon Alloy Production', Metals
2018
Cholake S; Pahlevani F; Gaikwad V; Millicer H; Sahajwalla V,
2018,
'Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product',
Resources, Conservation and Recycling,
136,
pp. 9 - 21,
http://dx.doi.org/10.1016/j.resconrec.2018.03.025 2018
Heriyanto ; Pahlevani F; Sahajwalla V,
2018,
'From waste glass to building materials – An innovative sustainable solution for waste glass',
Journal of Cleaner Production,
191,
pp. 192 - 206,
http://dx.doi.org/10.1016/j.jclepro.2018.04.214 2018
Maroufi S; Mayyas M; Nekouei RK; Assefi M; Sahajwalla V,
2018,
'Thermal Nanowiring of E-Waste: A Sustainable Route for Synthesizing Green Si3N4 Nanowires',
ACS Sustainable Chemistry and Engineering,
6,
pp. 3765 - 3772,
http://dx.doi.org/10.1021/acssuschemeng.7b04139 2018
Handoko W; Pahlevani F; Sahajwalla V,
2018,
'Enhancing Corrosion Resistance and Hardness Properties of Carbon Steel through Modification of Microstructure',
materials,
11,
pp. 2404,
http://dx.doi.org/10.3390/ma11122404 2018
Tanaka Y; Pahlevani F; Privat K; Moon S; Dippenaar R; Kitamura S; Sahajwalla V,
2018,
'Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation',
Metallurgical and Materials Transactions B,
http://dx.doi.org/10.1007/s11663-018-1394-5 2018
Nekouei R; Pahlevani F; Rajarao R; Golmohammadzadeh R; Sahajwalla V,
2018,
'Two-step pre-processing enrichment of waste printed circuit boards:
Mechanical milling and physical separation',
Journal of Cleaner Production,
http://dx.doi.org/10.1016/j.jclepro.2018.02.250 2018
Farzana R; Rajarao R; Bhat BR; Sahajwalla V,
2018,
'Performance of an activated carbon supercapacitor electrode synthesised from waste Compact Discs (CDs)',
Journal of Industrial and Engineering Chemistry,
65,
pp. 387 - 396,
http://dx.doi.org/10.1016/j.jiec.2018.05.011 2018
Farzana R; Rajarao R; Hassan K; Behera PR; Sahajwalla V,
2018,
'Thermal nanosizing: Novel route to synthesize manganese oxide and zinc oxide nanoparticles simultaneously from spent Zn–C battery',
Journal of Cleaner Production,
196,
pp. 478 - 488,
http://dx.doi.org/10.1016/j.jclepro.2018.06.055 2018
Ulman KN; Maroufi S; Bhattacharyya S; Sahajwalla V,
2018,
'Thermal transformation of printed circuit boards at 500 °C for
synthesis of a copper-based product',
Journal of Cleaner Production,
198,
pp. 1485 - 1493,
http://dx.doi.org/10.1016/j.jclepro.2018.07.140 2018
Farzana R; Rajarao R; Behera PR; Hassan K; Sahajwalla V,
2018,
'Zinc oxide nanoparticles from waste Zn-C battery via thermal route: Characterization and properties',
Nanomaterials,
8,
pp. 717,
http://dx.doi.org/10.3390/nano8090717 2018
Hossain R; Pahlevani F; Sahajwalla V,
2018,
'Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates',
Metals,
8,
pp. 580,
http://dx.doi.org/10.3390/met8080580 2018
Roy H; Pahlevani F; Cholake S; Echeverria C; Banerjee A; Sahajwalla V,
2018,
'Simulation of Marine Bio-Composite Using Empirical Data Combined with Finite Element Technique',
journal of composite science,
2,
pp. 48 - 48,
http://dx.doi.org/10.3390/jcs2030048 2018
Kumar U; Gaikwad V; Mayyas M; Sahajwalla V; Joshi RK, 2018, 'Extraordinary supercapacitance in activated carbon produced via a sustainable approach', Journal of Power Sources, 394, pp. 140 - 147
2018
Lian B; De Luca S; You Y; Sahajwalla V; Smith SC; Leslie G; Joshi RK,
2018,
'Extraordinary water adsorption characteristics of graphene oxide',
Chemical Science,
9,
pp. 5106 - 5111,
http://dx.doi.org/10.1039/C8SC00545A 2018
Yin S; Rajarao R; Pahlevani F; Sahajwalla V,
2018,
'Sustainable Steel Carburization by Using Snack Packaging Plastic Waste as Carbon Resources',
Metals,
8,
pp. 78,
http://dx.doi.org/10.3390/met8010078 2018
Kumar U; Gaikwad V; Mayyas M; Bucknall M; Sahajwalla V,
2018,
'Application of High-Resolution NMR and GC-MS to Study Hydrocarbon Oils Derived from Noncatalytic Thermal Transformation of e-Waste Plastics',
ACS Omega,
3,
pp. 9282 - 9289,
http://dx.doi.org/10.1021/acsomega.8b01284 2018
Karbalaei Mirza Shahrbabaki Z; Pahlevani F; Gorjizadeh N; Hossain R; Ghasemian M; Gaikwad V; Sahajwalla V,
2018,
'Direct Transformation of Metallized Paper into Al-Si Nano-Rod and Al Nano-Particles Using Thermal Micronizing Technique',
Materials,
11,
pp. 1964 - 1964,
http://dx.doi.org/10.3390/ma11101964 2018
Assefi M; Maroufi S; Mayyas M; Sahajwalla V,
2018,
'Recycling of Ni-Cd batteries by selective isolation and hydrothermal synthesis of porous NiO nanocuboid',
Journal of Environmental Chemical Engineering,
6,
pp. 4671 - 4675,
http://dx.doi.org/10.1016/j.jece.2018.07.021 2018
You Y; Jin XH; Wen XY; Sahajwalla V; Chen V; Bustamante H; Joshi RK,
2018,
'Application of graphene oxide membranes for removal of natural organic matter from water',
Carbon,
129,
pp. 415 - 419,
http://dx.doi.org/10.1016/j.carbon.2017.12.032 2018
Nekouei R; Pahlevani F; Rajarao R; Gomohammadzadeh R; Sahajwalla V; Khayyam Nekouei R,
2018,
'Direct transformation of waste printed circuit boards to nano-structured powders through mechanical alloying',
Materials and Design,
141,
pp. 26 - 36,
http://dx.doi.org/10.1016/j.matdes.2017.12.032 2018
Heriyanto ; Pahlevani F; Sahajwalla V,
2018,
'Synthesis of calcium silicate from selective thermal transformation of waste glass and waste shell',
Journal of Cleaner Production,
172,
pp. 3019 - 3027,
http://dx.doi.org/10.1016/j.jclepro.2017.11.109 2018
Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2018,
'A Green Route to Synthesize Pr3+/Dy3+-Doped Nd2O3 Nanoreplicas from Nd-Fe-B Magnets',
ACS Sustainable Chemistry and Engineering,
6,
pp. 3402 - 3410,
http://dx.doi.org/10.1021/acssuschemeng.7b03585 2018
Maroufi S; Nekouei RK; Hossain R; Assefi M; Sahajwalla V,
2018,
'Recovery of Rare Earth (i.e., La, Ce, Nd, and Pr) Oxides from End-of-Life Ni-MH Battery via Thermal Isolation',
ACS Sustainable Chemistry and Engineering,
6,
pp. 11811 - 11818,
http://dx.doi.org/10.1021/acssuschemeng.8b02097 2018
Maroufi S; Nekouei RK; Assefi M; Sahajwalla V,
2018,
'Waste-cleaning waste: synthesis of ZnO porous nano-sheets from batteries for dye degradation',
Environmental Science and Pollution Research,
25,
pp. 28594 - 28600,
http://dx.doi.org/10.1007/s11356-018-2850-0 2018
Maroufi S; Nekouei RK; Hassan K; Sahajwalla V,
2018,
'Thermal Transformation of Mixed E-Waste Materials into Clean SiMn/FeMn Alloys',
ACS Sustainable Chemistry and Engineering,
6,
pp. 13296 - 13301,
http://dx.doi.org/10.1021/acssuschemeng.8b02884 2018
Ulman K; Ghose A; Maroufi S; Mansuri I; Sahajwalla V,
2018,
'Disentanglement of random access memory cards to regenerate copper foil: A novel thermo-electrical approach',
Waste Management,
81,
pp. 138 - 138,
http://dx.doi.org/10.1016/j.wasman.2018.10.002 2018
Kumar U; Maroufi S; Rajarao R; Mayyas M; Mansuri I; Joshi RK; Sahajwalla V,
2017,
'Cleaner Production of Iron by using Waste Macadamia Biomass as a Carbon Resource',
Journal of Cleaner Production,
158,
pp. 218 - 224,
http://dx.doi.org/10.1016/j.jclepro.2017.04.115 2017
Park H; Sohn I; Freislich M; Sahajwalla V,
2017,
'Investigation on the Reduction Behavior of Coal Composite Pellet at Temperatures between 1373 and 1573 K',
Steel Research International,
88,
http://dx.doi.org/10.1002/srin.201600169 2017
Rajagopal RR; Rajarao R; Cholake ST; Sahajwalla V,
2017,
'Sustainable composite panels from non-metallic waste printed circuit boards and automotive plastics',
Journal of Cleaner Production,
144,
pp. 470 - 481,
http://dx.doi.org/10.1016/j.jclepro.2016.12.139 2017
Deng J; You Y; Bustamante H; Sahajwalla V; Joshi RK,
2017,
'Mechanism of Water Transport in Graphene Oxide Laminates',
Chemical Science,
8,
pp. 1701 - 1704,
http://dx.doi.org/10.1039/C6SC03909J 2017
Shokri A; Pahlevani F; Cole I; Sahajwalla V,
2017,
'Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy',
Journal of Environmental Management,
199,
pp. 7 - 12,
http://dx.doi.org/10.1016/j.jenvman.2017.05.028 2017
Maroufi S; Mayyas M; Sahajwalla V,
2017,
'Waste materials conversion into mesoporous silicon carbide nanocermics: Nanofibre/particle mixture',
Journal of Cleaner Production,
157,
pp. 213 - 221,
http://dx.doi.org/10.1016/j.jclepro.2017.04.109 2017
Khanna R; Ikram-Ul-Haq M; Rawal A; Rajarao R; Sahajwalla V; Cayumil R; Mukherjee PS; Cayumil Montecino R,
2017,
'Formation of carbyne-like materials during low temperature pyrolysis of lignocellulosic biomass: A natural resource of linear sp carbons',
Scientific Reports,
7,
pp. 16832,
http://dx.doi.org/10.1038/s41598-017-17240-1 2017
Ellamparuthy G; Mukherjee PS; Khanna R; Jayasankar K; Cayumil R; Ikram-Ul-Haq M; Sahajwalla V; Mishra BK,
2017,
'Environmental Impact of Recycling Electronic Waste Using Thermal Plasma: in-Depth Analysis of Aerosol Particulates Captured in Gas Filters',
Current Environmental Engineering,
4,
http://dx.doi.org/10.2174/2212717804666170213104524 2017
You Y; Deng J; Tan X; Gorjizadeh N; Yoshimura M; Smith SC; Sahajwalla V; Joshi RK,
2017,
'On the mechanism of gas adsorption for pristine, defective and functionalized graphene.',
Phys Chem Chem Phys,
19,
pp. 6051 - 6056,
http://dx.doi.org/10.1039/c6cp07654h 2017
Kumar A; Choudhary V; Khanna R; Cayumil R; Ikram-ul-Haq M; Sahajwalla V; Angadi SKI; Paruthy GE; Mukherjee PS; Park M,
2017,
'Recycling polymeric waste from electronic and automotive sectors into value added products',
Frontiers of Environmental Science and Engineering,
11,
http://dx.doi.org/10.1007/s11783-017-0991-x 2017
Li K; Khanna R; Bouhadja M; Zhang J; Liu Z; Su B; Yang T; Sahajwalla V; Singh CV; Barati M,
2017,
'A molecular dynamic simulation on the factors influencing the fluidity of molten coke ash during alkalization with K2O and Na2O',
Chemical Engineering Journal,
313,
pp. 1184 - 1193,
http://dx.doi.org/10.1016/j.cej.2016.11.011 2017
Hossain R; Pahlevani F; Witteveen E; Banerjee A; Joe B; Prusty G; Dippenaar R; Sahajwalla V,
2017,
'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties',
Scientific Reports,
7,
pp. 13288,
http://dx.doi.org/10.1038/s41598-017-13749-7 2017
Yin S; Rajarao R; Kong C; Wang Y; Gong B; Sahajwalla V,
2017,
'Sustainable fabrication of protective nanoscale TiN thin film on a metal substrate by using automotive waste plastics',
ACS Sustainable Chemistry and Engineering,
5,
pp. 1549 - 1556,
http://dx.doi.org/10.1021/acssuschemeng.6b02253 2017
Ismail AN; Yunos NFM; Jamaludin SB; Idris MA; Ibrahim MH; Sahajwalla V,
2017,
'Influence of reduction temperatures on reduction of FeO-containing slag by agricultural waste',
Materials Science Forum,
888 MSF,
pp. 441 - 446,
http://dx.doi.org/10.4028/www.scientific.net/MSF.888.441 2017
You Y; Mayyas M; Xu SONG; Gaikwad V; Munroe P; Sahajwalla V; Joshi RK; Mansuri I,
2017,
'Growth of NiO Nanorods, SiC Nanowires and Monolayer Graphene Via a CVD Method',
Green Chemistry,
19,
pp. 5599 - 5607,
http://dx.doi.org/10.1039/C7GC02523H 2017
Khanna R; Ikram-Ul-Haq M; Rajarao R; Cayumil R; Rawal A; Sahajwalla V; Mukherjee PS,
2017,
'Novel multidimensional carbons from structural transformations of waste lignin: A low temperature pyrolysis investigation',
Fuel Processing Technology,
166,
pp. 312 - 321,
http://dx.doi.org/10.1016/j.fuproc.2017.06.013 2017
Maroufi S; Khayyam Nekouei R; Sahajwalla V,
2017,
'Thermal Isolation of Rare Earth Oxides from Nd-Fe-B Magnets Using Carbon from Waste Tyres',
ACS Sustainable Chemistry and Engineering,
5,
pp. 6201 - 6208,
http://dx.doi.org/10.1021/acssuschemeng.7b01133 2017
Cholake ST; Rajarao R; Henderson P; Rajagopal RR; Sahajwalla V,
2017,
'Composite panels obtained from automotive waste plastics and agricultural macadamia shell waste',
Journal of Cleaner Production,
151,
pp. 163 - 171,
http://dx.doi.org/10.1016/j.jclepro.2017.03.074 2017
Gaikwad V; Kumar U; Pahlevani F; Piadasa A; Sahajwalla V,
2017,
'Thermal Transformation of Waste Toner Powder into a Value-Added Ferrous Resource',
ACS Sustainable Chemistry and Engineering,
5,
pp. 11543 - 11550,
http://dx.doi.org/10.1021/acssuschemeng.7b02875 2017
Echeverria C; Pahlevani F; Gaikwad V; Sahajwalla V,
2017,
'The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite',
Journal of Cleaner Production,
154,
pp. 284 - 294,
http://dx.doi.org/10.1016/j.jclepro.2017.04.020 2017
Saini R; Khanna R; Dutta RK; Cayumil R; Ikram-Ul-Haq M; Agarwala V; Ellamparuthy G; Jayasankar K; Mukherjee PS; Sahajwalla V,
2017,
'A novel approach for reducing toxic emissions during high temperature processing of electronic waste',
Waste Management,
http://dx.doi.org/10.1016/j.wasman.2017.02.023 2017
Handoko W; Pahlevani F; Sahajwalla V,
2017,
'Corrosion behaviour of dual-phase high carbon steel – Microstructure influence',
Journal of Manufacturing and Materials Processing,
1,
pp. 21,
http://dx.doi.org/10.3390/jmmp1020021 2017
Cayumil R; Ikram-Ul-Haq M; Khanna R; Saini R; Mukherjee PS; Mishra BK; Sahajwalla V,
2017,
'High temperature investigations on optimising the recovery of copper from waste printed circuit boards',
Waste Management,
http://dx.doi.org/10.1016/j.wasman.2017.01.001 2017
Mansuri I; Khanna R; Sahajwalla V,
2017,
'Recycling Carbonaceous Industrial/Commercial Waste as a Carbon Resource in Iron and Steelmaking',
Steel Research International,
88,
http://dx.doi.org/10.1002/srin.201600333 2017
Rajagopal RR; Rajarao R; Sahajwalla V,
2017,
'Synthesis of glass fiber-nano silicon carbide composite by using waste printed circuit boards and compact discs as resources',
Composites Communications,
5,
pp. 19 - 22,
http://dx.doi.org/10.1016/j.coco.2017.05.002 2017
Shokri A; Pahlevani F; Levick K; Cole I; Sahajwalla V,
2017,
'Synthesis of copper-tin nanoparticles from old computer printed circuit boards',
Journal of Cleaner Production,
142,
pp. 2586 - 2592,
http://dx.doi.org/10.1016/j.jclepro.2016.11.017 2017
Mayyas M; Pahlevani F; Maroufi S; Liu Z; Sahajwalla V,
2017,
'Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste',
Journal of Environmental Management,
188,
pp. 32 - 42,
http://dx.doi.org/10.1016/j.jenvman.2016.11.079 2017
Maroufi S; Mayyas M; Mansuri I; O’Kane P; Skidmore C; Jin Z; Fontana A; Sahajwalla V,
2017,
'Study of Reaction Between Slag and Carbonaceous Materials',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
48,
pp. 2316 - 2323,
http://dx.doi.org/10.1007/s11663-017-1020-y 2017
Mayyas M; Pahlevani F; Bucknall M; Maroufi S; You Y; Liu Z; Sahajwalla V,
2017,
'Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons as a Process Byproduct',
ACS Sustainable Chemistry and Engineering,
5,
pp. 5440 - 5448,
http://dx.doi.org/10.1021/acssuschemeng.7b00774 2017
Kumar A; Choudhary V; Khanna R; Mukherjee PS; Cayumil R; Ikram-ul-Haq M; Jayasankar K; Mishra BK; Sahajwalla V,
2017,
'Polymer Composites Utilizing Electronic Waste as Reinforcing Fillers: Mechanical and Rheological Properties',
Current Applied Polymer Science,
1,
pp. 86 - 95,
http://dx.doi.org/10.2174/2452271601666161114153139 2017
Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V,
2016,
'Surface Modification of Steel Using Automotive Waste as Raw Materials',
Procedia Manufacturing,
7,
pp. 387 - 394,
http://dx.doi.org/10.1016/j.promfg.2016.12.007 2016
Ikram-ul-Haq M; Khanna R; Sahajwalla V,
2016,
'Interfacial reactions between alumina and carbon refractories and molten iron at 1,823 K',
High Temperature Materials and Processes,
2015,
pp. 895 - 904,
http://dx.doi.org/10.1515/htmp-2015-0127 2016
Tickner J; Rajarao R; Lovric B; Ganly B; Sahajwalla V,
2016,
'Measurement of Gold and Other Metals in Electronic and Automotive Waste Using Gamma Activation Analysis',
Journal of Sustainable Metallurgy,
2,
pp. 296 - 303,
http://dx.doi.org/10.1007/s40831-016-0051-y 2016
Rajarao R; Sahajwalla V,
2016,
'A cleaner, sustainable approach for synthesising high purity silicon carbide and silicon nitride nanopowders using macadamia shell waste',
Journal of Cleaner Production,
133,
pp. 1277 - 1282,
http://dx.doi.org/10.1016/j.jclepro.2016.06.029 2016
Hong L; Sahajwalla V,
2016,
'Reaction between Steel-Making Slag and Carbonaceous Materials while Mixing with High Density Polyethylene',
High Temperature Materials and Processes,
35,
pp. 65 - 71,
http://dx.doi.org/10.1515/htmp-2014-0122 2016
Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V,
2016,
'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics',
Journal of Analytical and Applied Pyrolysis,
120,
pp. 60 - 74,
http://dx.doi.org/10.1016/j.jaap.2016.04.010 2016
Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V,
2016,
'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale',
Scientific Reports,
6,
http://dx.doi.org/10.1038/srep34958 2016
Nair A; Vineesh T; Thomas S; Sahajwalla V; Joshi RK; Alwarappan S; Kalarikkal N; Kala M,
2016,
'Boron doped graphene wrapped silver nanowires as an efficient electrocatalyst for molecular oxygen reduction',
Scientific Reports,
6,
pp. 37731,
http://dx.doi.org/10.1038/srep37731 2016
Joshi RK; Shukla S; Saxena S; Lee G-H; Sahajwalla V; Alwarappan S,
2016,
'Hydrogen generation via photoelectrochemical water splitting using chemically exfoliated MoS2 layers',
AIP Advances,
6,
pp. 15315 - 15315,
http://dx.doi.org/10.1063/1.4941062 2016
Mayyas M; Pahlevani F; Handoko W; Sahajwalla V,
2016,
'Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics',
Waste Management,
50,
pp. 173 - 183,
http://dx.doi.org/10.1016/j.wasman.2016.02.003 2016
Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V; Goda R,
2016,
'Enhancing steel properties through in situ formation of ultrahard ceramic surface',
Scientific Reports,
6,
pp. 38740,
http://dx.doi.org/10.1038/srep38740 2016
Rajagopal RR; Aravinda LS; Rajarao R; Bhat BR; Sahajwalla V,
2016,
'Activated carbon derived from non-metallic printed circuit board waste for supercapacitor application',
Electrochimica Acta,
211,
pp. 488 - 498,
http://dx.doi.org/10.1016/j.electacta.2016.06.077 2016
Suriani AB; Nurhafizah MD; Mohamed A; Masrom AK; Sahajwalla V; Joshi RK,
2016,
'Highly conductive electrodes of graphene oxide/natural rubber latex-based electrodes by using a hyper-branched surfactant',
MATERIALS & DESIGN,
http://dx.doi.org/10.1016/j.matdes.2016.03.067 2016
Farzana R; Rajarao R; Sahajwalla V,
2016,
'Characteristics of waste automotive glasses as silica resource in ferrosilicon synthesis',
Waste Management and Research,
34,
pp. 113 - 121,
http://dx.doi.org/10.1177/0734242X15617010 2016
Molkeri A; Pahlevani F; Emmanuelawati I; Sahajwalla V,
2016,
'Thermal and mechanical stability of retained austenite in high carbon steel: An in-situ investigation',
Materials Letters,
163,
pp. 209 - 213,
http://dx.doi.org/10.1016/j.matlet.2015.10.083 2016
Li K; Bouhadja M; Khanna R; Zhang J; Liu Z; Zhang Y; Yang T; Sahajwalla V; Yang Y; Barati M,
2016,
'Influence of SiO2 reduction on the local structural order and fluidity of molten coke ash in the high temperature zone of a blast furnace. A molecular dynamics simulation investigation',
Fuel,
186,
pp. 561 - 570,
http://dx.doi.org/10.1016/j.fuel.2016.08.107 2016
Rajagopal RR; Rajarao R; Sahajwalla V,
2016,
'High temperature transformations of waste printed circuit boards from computer monitor and CPU: Characterisation of residues and kinetic studies',
Waste Management,
57,
pp. 91 - 101,
http://dx.doi.org/10.1016/j.wasman.2015.11.016 2016
Kumar A; Choudhary V; Khanna R; Tripathi SN; Ikram-Ul-Haq M; Sahajwalla V,
2016,
'Structural, thermal, morphological and dynamic mechanical characteristics of waste-reinforced polypropylene composites: A novel approach for recycling electronic waste',
Journal of Applied Polymer Science,
133,
http://dx.doi.org/10.1002/app.43389 2016
Kumar A; Khanna R; Ikram-Ul-Haq M; Spink J; Sahajwalla V,
2016,
'Corrosion Behavior of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550 °c',
Steel Research International,
87,
pp. 46 - 56,
http://dx.doi.org/10.1002/srin.201400590 2016
Farzana R; Sahajwalla V,
2015,
'Novel Recycling to Transform Automotive Waste Glass and Plastics into SiC-Bearing Resource by Silica Reduction',
Journal of Sustainable Metallurgy,
1,
pp. 65 - 74,
http://dx.doi.org/10.1007/s40831-014-0004-2 2015
Li K; Zhang J; Barati M; Khanna R; Liu Z; Zhong J; Ning X; Ren S; Yang T; Sahajwalla V,
2015,
'Influence of alkaline (Na, K) vapors on carbon and mineral behavior in blast furnace cokes',
Fuel,
145,
pp. 202 - 213,
http://dx.doi.org/10.1016/j.fuel.2014.12.086 2015
Rajarao R; Farzana R; Khanna R; Sahajwalla V,
2015,
'Synthesis of SiC/Si3N4 nanocomposite by using automotive waste tyres as resource',
Journal of Industrial and Engineering Chemistry,
29,
pp. 35 - 38,
http://dx.doi.org/10.1016/j.jiec.2015.04.006 2015
Li K; Khanna R; Zhang J; Barati M; Liu Z; Xu T; Yang T; Sahajwalla V,
2015,
'Comprehensive Investigation of Various Structural Features of Bituminous Coals Using Advanced Analytical Techniques',
Energy and Fuels,
29,
pp. 7178 - 7189,
http://dx.doi.org/10.1021/acs.energyfuels.5b02064 2015
Prasad R; Gorjizadeh N; Rajarao R; Sahajwalla V; Bhat BR,
2015,
'Plant root nodule like nickel-oxide-multi-walled carbon nanotube composites for non-enzymatic glucose sensors',
Rsc Advances,
5,
pp. 44792 - 44799,
http://dx.doi.org/10.1039/c5ra03720d 2015
Kumar A; Khanna R; Ikram-ul-Haq M; Spink J; Sahajwalla V,
2015,
'Corrosion Behavior of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550 °C',
Steel Research International,
http://dx.doi.org/10.1002/srin.201400590 2015
Sahajwalla V; Cayumil R; Khanna R; Ikram-Ul-Haq M; Rajarao R; Mukherjee PS; Hill A,
2015,
'Recycling Polymer-Rich Waste Printed Circuit Boards at High Temperatures: Recovery of Value-Added Carbon Resources',
Journal of Sustainable Metallurgy,
1,
pp. 75 - 84,
http://dx.doi.org/10.1007/s40831-014-0002-4 2015
Kumar A; Khanna R; Ikram-Ul-Haq M; Spink J; Sahajwalla V,
2015,
'Effect of Glaze on the Corrosion Behavior of ZrO2-Graphite Insert of the Submerged Entry Nozzle in the Continuous Casting of Steel',
Steel Research International,
86,
pp. 1004 - 1013,
http://dx.doi.org/10.1002/srin.201400266 2015
Khanna R; Ikram-Ul-Haq M; Cayumil R; Rajarao R; Sahajwalla V,
2015,
'Novel carbon micro fibers and foams from waste printed circuit boards',
Fuel Processing Technology,
134,
pp. 473 - 479,
http://dx.doi.org/10.1016/j.fuproc.2015.03.004 2015
Lundgren M; Khanna R; Ökvist LS; Sahajwalla V; Björkman B,
2014,
'The evolution of structural order as a measure of thermal history of coke in the blast furnace',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
45,
pp. 603 - 616,
http://dx.doi.org/10.1007/s11663-013-9977-7 2014
Ko KH; Rawal A; Sahajwalla V,
2014,
'Analysis of thermal degradation kinetics and carbon structure changes of co-pyrolysis between macadamia nut shell and PET using thermogravimetric analysis and 13C solid state nuclear magnetic resonance',
Energy Conversion and Management,
86,
pp. 154 - 164,
http://dx.doi.org/10.1016/j.enconman.2014.04.060 2014
Cayumil R; Khanna R; Ikram-Ul-Haq M; Rajarao R; Hill A; Sahajwalla V,
2014,
'Generation of copper rich metallic phases from waste printed circuit boards',
Waste Management,
34,
pp. 1783 - 1792,
http://dx.doi.org/10.1016/j.wasman.2014.05.004 2014
Rajarao R; Mansuri I; Dhunna R; Khanna R; Sahajwalla V,
2014,
'Characterisation of gas evolution and char structural change during pyrolysis of waste CDs',
Journal of Analytical and Applied Pyrolysis,
105,
pp. 14 - 22,
http://dx.doi.org/10.1016/j.jaap.2013.09.014 2014
Li K; Khanna R; Zhang J; Liu Z; Sahajwalla V; Yang T; Kong D,
2014,
'The evolution of structural order, microstructure and mineral matter of metallurgical coke in a blast furnace: A review',
Fuel,
133,
pp. 194 - 215,
http://dx.doi.org/10.1016/j.fuel.2014.05.014 2014
Rajarao R; Mansuri I; Dhunna R; Khanna R; Sahajwalla V,
2014,
'Study of structural evolution of chars during rapid pyrolysis of waste CDs at different temperatures',
Fuel,
134,
pp. 17 - 25,
http://dx.doi.org/10.1016/j.fuel.2014.05.054 2014
Rajarao R; Ferreira R; Sadi SHF; Khanna R; Sahajwalla V; Fahandej Sadi S,
2014,
'Synthesis of silicon carbide nanoparticles by using electronic waste as a carbon source',
Materials Letters,
120,
pp. 65 - 68,
http://dx.doi.org/10.1016/j.matlet.2014.01.018 2014
Bandyopadhyay R; Gupta S; Lindblom B; Jonsson S; French D; Sahajwalla V,
2014,
'Assessment of ash deposition tendency in a rotary kiln using Thermo-mechanical analysis and Experimental Combustion Furnace',
Fuel,
135,
pp. 301 - 307,
http://dx.doi.org/10.1016/j.fuel.2014.06.064 2014
Rajarao R; Jayanna RP; Sahajwalla V; Bhat BR,
2014,
'GreenApproach to Decorate Multi-Walled Carbon Nanotubes by Metal/Metal Oxide Nanoparticles',
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014),
5,
pp. 69 - 75,
http://dx.doi.org/10.1016/j.mspro.2014.07.243 2014
Kumar A; Khanna R; Ikram-ul-Haq M; Spink J; Sahajwalla V,
2014,
'Effect of glaze on the corrosion behavior of ZrO2-graphite insert of the submerged entry nozzle in the continuous casting of steel',
Steel Research International,
http://dx.doi.org/10.1002/srin.201400266 2014
Kumar A; Khanna R; Spink J; Sahajwalla V,
2014,
'Fundamental investigations on the corrosion of ZrO2-C refractories during interaction with a casting mould meniscus slag',
Steel Research International,
85,
pp. 1185 - 1193,
http://dx.doi.org/10.1002/srin.201300336 2014
Dankwah JR; Koshy P; Sahajwalla V,
2014,
'Reduction of FeO in EAF steelmaking slag by blends of metallurgical coke and end-of-life polyethylene terephthalate',
Ironmaking & Steelmaking,
41,
pp. 401 - 409,
http://dx.doi.org/10.1179/1743281213Y.0000000125 2014
Ko KH; Sahajwalla V; Rawal A,
2014,
'Specific molecular structure changes and radical evolution during biomass-polyethylene terephthalate co-pyrolysis detected by 13C and 1H solid-state NMR',
Bioresource Technology,
170,
pp. 248 - 255,
http://dx.doi.org/10.1016/j.biortech.2014.06.109 2014
khanna ; Cayumil R; mukherjee ; Sahajwalla VH, 2014, 'A novel recycling approach for transforming waste printed circuit boards into a material resource', Procedia Environmental Sciences
2014
Zhang CC; Sahajwalla V; Zhang FS,
2014,
'Tetrabromobisphenol A recovery from computer housing plastic by a new solvothermal process',
Environmental Chemistry Letters,
12,
pp. 347 - 352,
http://dx.doi.org/10.1007/s10311-014-0452-8 2014
Ikram-ul-Haq M; Khanna R; Wang Y; Sahajwalla V,
2014,
'A Novel X-ray Micro-diffraction Approach for Structural Characterization of Trace Quantities of Secondary Phases in Al2O3-C/Fe System',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
45,
pp. 1970 - 1973,
http://dx.doi.org/10.1007/s11663-014-0201-1 2014
Assadi MHN; Sahajwalla V; Al Assadi H,
2014,
'Recycling end-of-life polycarbonate in steelmaking: Ab initio study of carbon dissolution in molten iron',
Industrial and Engineering Chemistry Research,
53,
pp. 3861 - 3864,
http://dx.doi.org/10.1021/ie4031105 2014
Ramin L; Assadi MHN; Sahajwalla V,
2014,
'High-density polyethylene degradation into low molecular weight gases at 1823 K: An atomistic simulation',
Journal of Analytical and Applied Pyrolysis,
110,
pp. 318 - 321,
http://dx.doi.org/10.1016/j.jaap.2014.09.022 2014
Khanna R; Ikram-Ul-Haq M; Sadi SF; Sahajwalla V; Mukherjee PS; Seetharaman S; Fahandej Sadi S,
2014,
'Reduction reactions in Al2O3-C-Fe and Al 2O3-Fe2O3-C systems at 1 823 K',
ISIJ International,
54,
pp. 1485 - 1490,
http://dx.doi.org/10.2355/isijinternational.54.1485 2014
Farzana R; Rajarao R; Sahajwalla V,
2014,
'Transforming waste plastic into reductants for synthesis of ferrosilicon alloy',
Industrial and Engineering Chemistry Research,
53,
pp. 19870 - 19877,
http://dx.doi.org/10.1021/ie5041513 2014
Sharifah Shahnaz SB; Khanna R; Veena S; Hussin K; Noriman NZ; Sung Ting S,
2013,
'Characterizations on the effect of processing of polymers blend with petroleum coke (part I)',
Advanced Materials Research,
795,
pp. 644 - 648,
http://dx.doi.org/10.4028/www.scientific.net/AMR.795.644 2013
Park H; Sahajwalla V,
2013,
'Influence of CaO-SiO2-Al2O3 ternary oxide system on the reduction behavior of carbon composite pellet: Part II. morphological properties',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
44,
pp. 1390 - 1397,
http://dx.doi.org/10.1007/s11663-013-9932-7 2013
Sahajwalla V; Zaharia M; Mansuri I; Rajarao R; Dhunna R; Yunos NF; Khanna R; Saha-Chaudhury N; O'Kane P; Fontana A; Skidmore C; Vielhauer P; O'Connell D; Knights D, 2013, '2013 AIST Howe Memorial Lecture: The power of steelmaking - Harnessing high temperature reactions to transform waste into raw material resources', Aistech Iron and Steel Technology Conference Proceedings, 1, pp. 1 - 17
2013
Zaharia M; Sahajwalla VH; Saha-Chaudhury NM; O Kane P; Fontana A; Skidmore C; Knights D,
2013,
'Recycling of rubber tyres in electric arc furnace steelmaking: Carbon/slag reactions of coke/rubber blends',
High Temperature Materials and Processes,
31,
pp. 593 - 602,
http://dx.doi.org/10.1515/htmp-2012-0096 2013
Park H; Sahajwalla V,
2013,
'Influence of CaO-SiO2-Al2O3 Ternary Oxide System on the Reduction Behavior of Carbon Composite Pellet: Part I. Reaction Kinetics',
Metallurgical and Materials Transactions B,
44,
pp. 1379 - 1389,
http://dx.doi.org/10.1007/s11663-013-9955-0 2013
Sahajwalla V; Zaharia M; Mansuri I; Rajarao R; Dhunna R; Nur Yunos F; Khanna R; Saha-Chaudhury N; O'Kane P; Fontana A; Jin Z; Skidmore C; Vielhauer P; O'Connell D; Knights D, 2013, 'The power of steelmaking-harnessing high-temperature reactions to transform waste into raw material resources', Iron and Steel Technology, 10, pp. 68 - 83
2013
Kongkarat S; Khanna R; Sahajwalla VH,
2013,
'Interactions of polymer/coke blends with molten steel at 1823 K: Interfacial phenomena',
Steel Research International,
84,
pp. 362 - 369,
http://dx.doi.org/10.1002/srin.201200167 2013
Wechsler A; Zaharia M; Crosky AG; Jones H; Ramirez MJ; Ballerini AA; Nunez MA; Sahajwalla VH,
2013,
'Macadamia shell and castor oil-based sustainable particleboard: a comparison of its properties with conventional wood based particleboard',
Materials and Design,
50,
pp. 117 - 123,
http://dx.doi.org/10.1016/j.matdes.2013.03.008 2013
Hong L; Sahajwalla V,
2013,
'Carbothermic reduction of mullite at elevated temperature',
Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science,
44,
pp. 1541 - 1545,
http://dx.doi.org/10.1007/s11663-013-9920-y 2013
Sharma S; Khanna R; Mishra DD; Agarwala V; Sahajwalla V, 2013, 'Thermal Degradation Behavior of Mechanically Alloyed Mixtures of High Density Polyethylene (HDPE) and Petroleum Coke', Plastic and Polymer Technology (PAPT), 2, pp. 87 - 91
2013
Sahajwalla VH; Zaharia M; Kongkarat S; Khanna R; Rahman MM; Saha-Chaudhury NM; O Kane P; Dicker J; Skidmore C; Knights D,
2012,
'Recycling end-of-life polymers in an electric arc furnace steelmaking process: Fundamentals of polymer reactions with slag and metal',
Energy and Fuels,
26,
pp. 58 - 66,
http://dx.doi.org/10.1021/ef201175t 2012
Nath DCD; Sahajwalla VH,
2012,
'Analysis of Carbon Nanotubes Produced by Pyrolysis of Composite Film of Poly (Vinyl Alcohol) and Modified Fly Ash',
Materials Sciences and Applications,,
3,
pp. 103 - 109,
http://dx.doi.org/10.4236/msa.2012.32016 2012
Syed Bakar SS; Khanna R; Kamarudin H; Sahajwalla VH,
2012,
'Wettability and interfacial phenomena investigations on high-density polyethylene and petroleum coke',
Journal of Applied Polymer Science,
125,
pp. 2056 - 2062,
http://dx.doi.org/10.1002/app.36284 2012
Yunos NFM; Zaharia M; Idris MA; Nath DCD; Khanna R; Sahajwalla VH,
2012,
'Recycling Agricultural Waste from Palm Shells during Electric Arc Furnace Steelmaking',
Energy and Fuels,
26,
pp. 278 - 286,
http://dx.doi.org/10.1021/ef201184h 2012
Khanna R; Kongkarat S; Seetharaman S; Sahajwalla VH,
2012,
'Carbothermic reduction of alumina at 1 823 K in the presence of molten steel: A sessile drop investigation',
ISIJ International,
52,
pp. 992 - 999,
http://dx.doi.org/10.2355/isijinternational.52.992 2012
Fontana A; O'kane P; O'connell D; Sahajwalla VH; Zaharia M, 2012, 'Injection of Recycled Tyres in EAF Steelmaking as a Slag Foaming Agent', Steel Times International, 36, pp. 17 - 20
2012
Dankwah J; Koshy P; O''kane P; Sahajwalla VH,
2012,
'Reduction of FeO in EAF Steelmaking Slag by Blends of Metallurgical Coke and End-of-Life Tyre',
Steel Research International,
83,
pp. 766 - 774,
http://dx.doi.org/10.1002/srin.201200019 2012
Grigore M; Sakurovs R; French D; Sahajwalla VH,
2012,
'Properties and CO2 reactivity of the inert and reactive maceral-derived components in cokes',
International Journal of Coal Geology,
98,
pp. 1 - 9,
http://dx.doi.org/10.1016/j.coal.2012.04.004 2012
Kongkarat S; Khanna R; Koshy P; Sahajwalla VH; O Kane P,
2012,
'Recycling Waste Polymers in EAF steelmaking: Influence of polymer composition on carbon/slag interactions',
ISIJ International,
52,
pp. 385 - 393,
http://dx.doi.org/10.2355/isijinternational.52.385 2012
Nath DCD; Mansuri I; Zaharia M; Chaudhury N-S; Sahajwalla VH; Saha Chaudhury N,
2012,
'Recycling of end-of-life melamine at 1 600°C for carbon dissolution into liquid iron',
ISIJ International,
52,
pp. 922 - 927,
http://dx.doi.org/10.2355/isijinternational.52.922 2012
Nath DCD; Sahajwalla VH,
2012,
'Growth of Carbon Nanotubes by Pyrolysis of Composite Film of Poly (Vinyl Alcohol) and Modified Fly Ash',
Materials Sciences and Applications,,
3,
pp. 120 - 124,
http://dx.doi.org/10.4236/msa.2012.32019 2012
Koshy P; Gupta SK; Edwards P; Sahajwalla VH,
2011,
'Effect of BaSO4 on the interfacial phenomena of high-alumina refractories with Al-alloy',
Journal of Materials Science,
46,
pp. 468 - 478,
http://dx.doi.org/10.1007/s10853-010-4931-4 2011
YUNOS NFM; AHMAD KR; ZAHARIA M; SAHAJWALLA V,
2011,
'Combustion of Agricultural Waste and Coke Blends during High Temperature Processes: Effect of Physical, Chemical and Surface Properties',
実験力学,
11,
pp. s261 - s266,
http://dx.doi.org/10.11395/jjsem.11.s261 2011
Yunos NFM; Zaharia M; Ahmad K; Nath DCD; Iwase M; Sahajwalla VH,
2011,
'Structural transformation of agricultural waste/coke blends and their implications during high temperature processes',
ISIJ International,
51,
pp. 1185 - 1193,
http://dx.doi.org/10.2355/isijinternational.51.1185 2011
Khanna R; Ikram-ul haq M; Wang Y; Seetharaman S; Sahajwalla VH,
2011,
'Chemical interactions of alumina-carbon refractories with molten steel at 1823 K (1550 °C): Implications for refractory degradation and steel quality',
Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science,
42,
pp. 677 - 684(8),
http://dx.doi.org/10.1007/s11663-011-9520-7 2011
Kongkarat S; Khanna R; Koshy P; O Kane P; Sahajwalla VH,
2011,
'Use of waste bakelite as a raw material resource for recarburization in steelmaking processes',
Steel Research International,
82,
pp. 1228 - 1239,
http://dx.doi.org/10.1002/srin.201100104 2011
Yunos NFM; Ahmad K; Zaharia M; Sahajwalla VH, 2011, 'Combustion of Agricultural Waste and Coke Blends during High Temperature Processes: The Effect of Physical, Chemical and Surface Properties', Journal of the Japanese Society for Experimental Mechanics, 11, pp. 261 - 266
2011
Sahajwalla VH; Zaharia M; Kongkarat S; Khanna R; Saha-Chaudhury NM; O Kane P,
2010,
'Recycling Plastics as a Resource for Electric Arc Furnace (EAF) Steelmaking: Combustion and Structural Transformations of Metallurgical Coke and Plastic Blends',
Energy and Fuels,
24,
pp. 379 - 391,
http://dx.doi.org/10.1021/ef900875r 2010
Sahajwalla V; Kongkarat S; Koshy P; Khanna R; Zaharia M; Saha-Chaudhury N; O'Kane P; Skidmore C; Knights D, 2010, 'Utilization of waste plastics in EAF steelmaking: High-temperature interactions between slag and carbonaceous materials', AISTech - Iron and Steel Technology Conference Proceedings, pp. 127 - 136
2010
Sahajwalla VH; Yunes Rubio PJ; Saha-Chaudhury NM, 2009, 'Carbon Dissolution Occurring during Graphite–Ferrosilicon Interactions at 1 550°C', ISIJ International, 49, pp. 1868 - 1873
2009
Meunier P; Skyllas-Kazacos M; Welch B; Sahajwalla VH,
2009,
'Effect of dopants on wetting properties and electrochemical behaviour of graphite anodes in molten Al2O3-cryolite melts',
Journal of Applied Electrochemistry,
39,
pp. 837 - 847,
http://dx.doi.org/10.1007/s10800-008-9730-0 2009
Sahajwalla VH; Rahman MM; Khanna R; Saha-Chaudhury NM; O Kane P; Skidmore C; Knights D, 2009, 'Recycling waste plastics in EAF steelmaking: Carbon/slag interactions of HDPE-coke blends', Steel Research International, 80, pp. 535 - 543
2009
Rahman MM; Khanna R; Sahajwalla VH; O Kane P, 2009, 'The Influence of Ash Impurities on Interfacial Reactions between Carbonaceous Materials and EAF Slag at 1550 degrees C', ISIJ International, 49, pp. 329 - 336
2009
Sahajwalla VH; Khanna R; Zaharia M; Kongkarat S; Rahman MM; Kim B; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D, 2009, 'Environmentally sustainable EAF steelmaking through introduction of recycled plastics and tires: Laboratory and plant studies', Iron and Steel Technology, 6, pp. 43 - 50
2009
Grigore M; Sakurovs R; French D; Sahajwalla VH, 2009, 'Coke gasification: The influence and behavior of inherent catalytic mineral matter', Energy and Fuels, 23, pp. 2075 - 2085
2009
Zaharia M; Sahajwalla VH; Khanna R; Koshy P; O Kane P, 2009, 'Carbon/Slag Interactions between Coke/Rubber Blends and EAF Slag at 1 550 degrees C', ISIJ International, 49, pp. 1513 - 1521
2009
Sahajwalla VH; Cham TS; Khanna R; Sakurovs R; French D, 2009, 'Influence of Mineral Matter on Carbon Dissolution from Metallurgical Coke into Molten Iron: Interfacial Phenomena', ISIJ International, 49, pp. 1860 - 1867
2009
Kim B; Gupta SK; French D; Sakurovs R; Sahajwalla VH, 2009, 'Effect of thermal treatment on coke reactivity and catalytic iron mineralogy', Energy and Fuels, 23, pp. 3694 - 3702
2009
Zaharia M; Sahajwalla VH; Kim B; Khanna R; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D, 2009, 'Recycling of rubber tires in electric arc furnace steelmaking: Simultaneous combustion of metallurgical coke and rubber tyres blends', Energy and Fuels, 23, pp. 2467 - 2474
2009
Lu L; Sahajwalla V; McLean A, 2009, 'Coal conversion reactions and their impact on BF PCI operations', 5th International Congress on the Science and Technology of Ironmaking Icsti 2009, pp. 813 - 817
2009
Sahajwalla VH; Lee SH; Khanna R; Hallin M; Lindblom B, 2009, 'Reduction Behaviour of Olivine Iron Ore Pellets in the Experimental Blast Furnace', Steel Research International, 80, pp. 702 - 708
2009
Grigore M; Sakurovs R; French D; Sahajwalla VH, 2008, 'Mineral matter in coals and their reactions during coking', International Journal of Coal Geology, 76, pp. 301 - 308
2008
Grigore M; Sakurovs R; French D; Sahajwalla VH, 2008, 'Mineral reactions during coke gasification with carbon dioxide', International Journal of Coal Geology, 75, pp. 213 - 224
2008
Koshy P; Gupta SK; Sahajwalla VH; Edwards P, 2008, 'Effect of CaF2 on interfacial phenomena of high alumina refractories with Al alloy', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 39, pp. 603 - 612
2008
Koshy P; Gupta SK; Sahajwalla VH; Edwards PS,
2008,
'Effect of silica on high-temperature interfacial phenomena of monolithic refractories with Al alloy',
Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science,
39,
pp. 331 - 339,
http://dx.doi.org/10.1007/s11663-008-9138-6 2008
Amin MH; Kazemzadeh A; Amin-Ebrahimabadi M; Saha-Chaudhury N; Sahajwalla V, 2008, 'Interazioni ira miscele reirattarie a base di magnesia e scorie di alluminato di calcio nell'industria dell'acciaio', C E Ca, 38, pp. 233 - 240
2008
Kim B; Gupta SK; Lee SH; Kim SJ; Sahajwalla VH,
2008,
'Devolatilization and cracking characteristics of Australian lumpy coals',
Energy and Fuels,
22,
pp. 514 - 522,
http://dx.doi.org/10.1021/ef700397t 2008
Kazuberns KT; Gupta SK; Grigore M; French D; Sakurovs R; Hallin M; Lindblom B; Sahajwalla VH, 2008, 'Coke mineral transformations in the experimental blast furnace', Energy and Fuels, 22, pp. 3407 - 3419
2008
Ray H; Sahajwalla VH; Bhoi B, 2008, 'Application of sessile drop technique (SDT) for study of reduction of FeO in slags: reduction by solid carbon as well as solute carbon', Ironmaking and Steelmaking, 35, pp. 514 - 523
2008
Perkins GM; Sahajwalla VH, 2008, 'Steady-State Model for Estimating Gas Production from Underground Coal Gasification', Energy and Fuels, 22, pp. 3902 - 3914
2008
Amin M; Kazemzadeh A; Amin-Ebrahimabadi M; Saha-Chaudhury NM; Sahajwalla VH, 2008, 'Interactions of magnesia castables used in steelmaking with calcium aluminate slag', Industrial Ceramics, 28, pp. 125 - 132
2008
Bhoi B; Ray HS; Sahajwalla V, 2008, 'Influence of different parameters on wettability of graphite by CaO-SiO2-FeO molten slag', Journal of the Institution of Engineers India Part mm Metallurgy and Material Science Division, 89, pp. 3 - 8
2008
Gupta SK; French D; Sakurovs R; Grigore M; Sun H; Cham T; Hilding T; Hallin M; Lindblom B; Sahajwalla VH,
2008,
'Minerals and iron-making reactions in blast furnaces',
Progress in Energy and Combustion Science,
34,
pp. 155 - 197,
http://dx.doi.org/10.1016/j.pecs.2007.04.001 2008
Hong L; Sahajwalla V, 2007, 'High-temperature performance of Al2O3-SiO 2-SiC-C refractory while using Al and BN additives', Aistech Iron and Steel Technology Conference Proceedings, 1, pp. 1319 - 1327
2007
Gupta SK; Dubikova M; French D; Sahajwalla VH,
2007,
'Effect of CO2 gasification on the transformations of coke minerals at high temperatures',
Energy and Fuels,
21,
pp. 1052 - 1061,
http://dx.doi.org/10.1021/ef060462j 2007
Gupta SK; Dubikova M; French D; Sahajwalla VH,
2007,
'Characterization of the origin and distribution of the minerals and phases in metallurgical cokes',
Energy and Fuels,
21,
pp. 303 - 313,
http://dx.doi.org/10.1021/ef060437d 2007
Khanna R; Rahman MF; Sahajwalla VH,
2007,
'Novel sessile drop software for quantitative estimation of slag foaming in carbon/slag interactions',
Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science,
38,
pp. 719 - 723,
http://dx.doi.org/10.1007/s11663-007-9078-6 2007
Perkins GM; Sahajwalla VH,
2007,
'Modelling of heat and mass transport phenomena and chemical reaction in underground coal gasification',
Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A,
85,
pp. 329 - 343,
http://dx.doi.org/10.1205/cherd06022 2007
Gupta SK; Sahajwalla VH; Kang T, 2007, 'Characterizing swelling behaviour of iron oxides during solid state reduction for COREX application and their implications on fines generation', ISIJ International, 47, pp. 1590 - 1598
2007
Sahajwalla V; Khanna R; Kapilashrami E; Seetharaman S,
2007,
'Depletion of Carbon from Al<SUB>2</SUB>O<SUB>3</SUB>-c Mixtures into Liquid Iron: Rate Controlling Mechanisms',
Canadian Metallurgical Quarterly,
46,
pp. 25 - 32,
http://dx.doi.org/10.1179/000844307794535678 2007
Sahajwalla VH; Khanna R; Kapilashrami E; Seetharaman S, 2007, 'Depletion of carbon from Al2O3-C mixtures into liquid iron: Rate controlling mechanisms', Canadian Metallurgical Quarterly, 46, pp. 25 - 32
2007
Gupta S; Sahajwalla V; Wood J,
2006,
'Simultaneous combustion of waste plastics with coal for pulverized coal injection application',
Energy and Fuels,
20,
pp. 2557 - 2563,
http://dx.doi.org/10.1021/ef060271g 2006
Gupta SK; Al-Omari YI; Sahajwalla VH; French D, 2006, 'Influence of carbon structure and mineral association of coals on their combustion characteristics for pulverized coal injection (PCI) application', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 37, pp. 457 - 473
2006
Khanna R; Rodgers BD; Mccarthy F; Sahajwalla VH, 2006, 'Dissolution of carbon from alumina-carbon mixtures into liquid iron: Influence of carbonaceous materials', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 37, pp. 623 - 632
2006
Yunes Rubio PJ; Hong L; Saha-Chaudhury NM; Bush R; Sahajwalla VH, 2006, 'Dynamic wetting of graphite and SiC by ferrosilicon alloys and silicon at 1550¿¿', ISIJ International, 46, pp. 1570 - 1576
2006
Gupta SK; Sahajwalla VH; Wood J, 2006, 'Simultaneous Combustion of Waste Plastics with Coal for PCI Application', Energy and Fuels, 20, pp. 2557 - 2663
2006
Moon JP; Sahajwalla VH, 2006, 'Investigation into the role of the boudouard reaction in self-reducing iron oxide and carbon briquettes', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 37, pp. 215 - 221
2006
Sahajwalla VH; Hong L; Saha-Chaudhury NM, 2006, 'Waste plastics - A resource for EAF steelmaking', Iron and Steel Technology, 3, pp. 91 - 96
2006
Perkins GM; Sahajwalla VH, 2006, 'Numerical study of the effects of operating conditions and coal properties on cavity growth in underground coal gasification', Energy and Fuels, 20, pp. 596 - 608
2006
Sahajwalla VH; Hong L; Saha-Chaudhury NM; Spencer D; Rahman MM, 2006, 'Influence of carbonaceous materials on slag foaming behavior during EAF steelmaking', Iron and Steel Technology, 3, pp. 54 - 63
2006
Kawakami M; Kanba H; Sato K; Takenaka T; Gupta SK; Sahajwalla VH; Chandratilleke R, 2006, 'Characterization of thermal annealing effects on the evolution of coke carbon structure using Raman spectroscopy and X-ray diffraction', ISIJ International, 46, pp. 1165 - 1170
2006
Perkins GM; Sahajwalla VH, 2005, 'A mathematical model for the chemical reaction of a semi-infinite block of coal in underground coal gasification', Energy and Fuels, 19, pp. 1679 - 1692
2005
Gray JL; Sahajwalla VH; Paramguru RK, 2005, 'Kinetics and mechanism of corrosion of laboratory hot briquetted iron', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 36, pp. 613 - 621
2005
Khanna R; Sahajwalla VH, 2005, 'An atomistic model for the graphite-alumina/liquid iron system:Monte-Carlo simulations on carbon dissolution', ACTA Materialia, 53, pp. 1205 - 1214
2005
Lae E; Sahajwalla VH; Welch B; Skyllas-Kazacos M, 2005, 'Influence of oxide dopants on the wetting of doped graphite bycryolite/alumina melts', Journal of Applied Electrochemistry, 35, pp. 199 - 206
2005
Gupta SK; Sahajwalla V; Saha-Chaudhury N; Burgo J; Chaubal P; Youmans T, 2005, 'Influence of coke / properties and reactivity on coke fines in a blast furnace', Iron and Steel Technology, 2, pp. 165 - 176
2005
Khanna R; Mccarthy F; Sun H; Simento N; Sahajwalla VH, 2005, 'Dissolution of carbon from coal-chars into liquid iron at 1550°C', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 36 B, pp. 719 - 729
2005
Khanna R; Sahajwalla VH; Hurt R, 2005, 'An atomistic technique for simulating non-covalent interactions inlarge ensembles of high-molecular-weight polyaromatics', Carbon, 43, pp. 67 - 77
2005
Kang TW; Gupta SK; Saha-Chaudhury NM; Sahajwalla VH, 2005, 'Wetting and interfacial reaction investigations of coke/slag systems and associated liquid permeability of blast furnaces', ISIJ International, 45, pp. 1526 - 1535
2005
Hilding T; Gupta SK; Sahajwalla VH; Bjorkman B; Wikstrom J, 2005, 'Degradation behaviour of a high CSR coke in an experimental blast furnace: Effect of carbon structure and alkali reactions', ISIJ International, 45, pp. 1041 - 1050
2005
Gupta SK; Sahajwalla VH; Burgo J; Chaubal PC; Youmans T, 2005, 'Carbon structure of coke at high temperatures and its influence on coke fines in blast furnace dust', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 36, pp. 385 - 394
2005
Mccarthy F; Khanna R; Sahajwalla VH; Simento N, 2005, 'Interfacial phenomena occurring during iron/char interactions in a blast furnace', ISIJ International, 45, pp. 1261 - 1268
2005
Kapilashrami E; Sahajwalla VH; Seetharaman S, 2004, 'Slag formation during high temperature interactions between refractories containing SiO2 and iron melts with oxygen', Ironmaking and Steelmaking, 31, pp. 417 - 422
2004
Kapilashrami E; Sahajwalla VH; Seetharaman S, 2004, 'Investigation of the wetting characteristics of liquid iron on mulliteby sessile drop technique', ISIJ International, 44, pp. 653 - 659
2004
Boominathan R; Saha-Chaudhury NM; Sahajwalla VH; Doran PM, 2004, 'Production of nickel bio-ore from hyperaccumulator plant biomass:Applications in phytomining', Biotechnology and Bioengineering, 86, pp. 243 - 250
2004
Hong L; Sahajwalla VH, 2004, 'Investigation of in-situ chemical reactions of Al2O3-SiC-SiO2-Crefractory and its interactions with slag', ISIJ International, 44, pp. 785 - 789
2004
Cham ST; Sahajwalla VH; Sakurovs R; Sun H; Dubikova M, 2004, 'Factors influencing carbon dissolution from cokes into liquid iron', ISIJ International, 44, pp. 1835 - 1841
2004
Sun H; Sahajwalla VH, 2004, 'Numerical analysis of reactions in a cupola melting furnace', ISIJ International, 44, pp. 27 - 36
2004
Sahajwalla VH; Mehta AS; Khanna R, 2004, 'Influence of chemical compositions of slag and graphite on thephenomena occurring in the graphite/slag interfacial region', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 35, pp. 75 - 83
2004
Moon JP; Sahajwalla VH, 2003, 'Kinetics model for the uniform conversion of self reducing iron oxide and carbon briquettes', ISIJ International, 43, pp. 1136 - 1142
2003
Mccarthy F; Sahajwalla VH; Hart JH; Saha-Chaudhury NM, 2003, 'Influence of Ash on Interfacial Reactions between Coke and Liquid Iron', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 34B, pp. 573 - 580
2003
Sahajwalla VH; Khanna R, 2003, 'Effect of sulfur on the dissolution behaviour of graphite in Fe-C-S melts: A Monte Carlo Simulation Study', Scandinavian Journal of Metallurgy, 32, pp. 53 - 57
2003
Mehta AS; Sahajwalla VH, 2003, 'Coal-char/slag Interactions during Pulverised Coal Injection in a Blast Furnace:Reaction Kinetics and Wetting Investigations', ISIJ International, 43, pp. 1512 - 1518
2003
Sahajwalla VH; Wu C; Khanna R; Saha-Chaudhury NM; Spink J, 2003, 'Kinetic Study of factors affecting In-situ reduction of silica in carbon-silica mixtures for refractories', ISIJ International, 43, pp. 1305 - 1315
2003
Sahajwalla VH; Zhao L, 2003, 'Interfacial phenomena during wetting of graphite/alumina mixtures by liquid iron', ISIJ International, 43, pp. 1 - 6
2003
lu L; Sahajwalla VH; Kong CH; Mclean A, 2002, 'Chemical Structure of chars prepared under conditions prevailing in the Blast Furnace PCI Operation', ISIJ International, 42, pp. 816 - 825
2002
lu L; Kong CH; Sahajwalla VH; Harris D, 2002, 'Char Structural Ordering during Pyrolysis and Combustion and its Effects on Char Reactivity', Fuel, the science and technology of fuel and energy, 81, pp. 1215 - 1225
2002
Gray JL; Saha-Chaudhury NM; Sahajwalla VH, 2002, 'Characterisation and corrosion of laboratory scale briquettes of reduced iron', ISIJ International, 42, pp. 826 - 833
2002
Sahajwalla VH; Khanna R, 2002, 'Influence of sulfur on the solubility of graphite in Fe-C-S melts: optimisation of interaction parameters', ACTA Materialia, 50, pp. 663 - 671
2002
Sahajwalla VH; Moon JP, 2001, 'Derivation of Shrinking Core Model for Finite Cylinder', ISIJ International, pp. 1 - 9
2001
Sahajwalla VH; Lu L; Harris D; Kong C; Hart J, 2001, 'Fundamental Study of Char Structure and Reactivity and its Application to Pulverised Coal Injection in Blast Furnaces', Materials Forum, pp. 168 - 180
2001
Sahajwalla VH; Mehta S, 2001, 'Influence of temperature on the wettability at the slag/carbon interface during pulverised coal injection in a blast furnace', Scandinavian Journal of Metallurgy, pp. 370 - 378
2001
Sahajwalla VH; Kong CH; Lu L, 2001, 'Quantitative X-ray diffraction Analysis and its Application to various Coals', Carbon, pp. 1821 - 1833
2001
Sahajwalla VH, 2001, 'Coal Char Reactivity and Structural Evolution During Combustion¿Factors Influencing Blast Furnace PCI Operation', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 811 - 820
2001
Sahajwalla V; Kong CH; Chaubal PC; Valia HS, 2000, 'Determination of proportions of coal char and coke fines in the offgas blast furnace samples', Iron and Steelmaker I and Sm, 27, pp. 69 - 72
2000
Wu C; Wiblen RJ; Sahajwalla VH, 2000, 'Influence of Ash on Mass Transfer and Interfacial Reaction between Natural Graphite and Liquid Iron,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 1099 - 1104
2000
Zhao L; Baoyin ; Na W; Sahajwalla VH; Pehlke RD, 2000, 'The Rheological Properties and Hot Tearing Behaviour of an Al-Cu Alloy,', International Journal of Cast Metals Research, 13, pp. 167 - 174
2000
Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla VH; Ostrovski O, 2000, 'Slag/Graphite Wettability and Reaction Kinetics: Part 2: Wettability influenced by Reduction Kinetics,', Ironmaking and Steelmaking, pp. 437 - 441
2000
Lu LM; Sahajwalla V; Harris D,
2000,
'Characterization of chars prepared from various pulverized coals at different temperatures using drop-tube furnace (vol 4, pg 869, 2000)',
ENERGY & FUELS,
14,
pp. 1125 - 1125,
http://dx.doi.org/10.1021/ef0001033 2000
Mckay JV; Archer RD; Sahajwalla VH; Young DJ; Honeyands T, 2000, 'Reoxidation of Hot Briquetted Iron in Salt Water', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 1133 - 1135
2000
Sahajwalla VH; Khanna R, 2000, 'Dissolution Behavior of Particulate Graphite in Fe-C Melts: A Monte Carlo Simulation Study,', Scandinavian Journal of Metallurgy, pp. 114 - 120
2000
Wu C; Sahajwalla VH, 2000, 'Dissolution Rates of Coals and Graphite in Fe-C-S melts in Direct Ironmaking: Dependence of Carbon Dissolution Rate on Carbon Structure - Communication,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 215 - 216
2000
Mehta AS; Sahajwalla VH, 2000, 'Influence of Composition of Slag and Carbonaceous Materials on the Wettability at Slag/Carbon Interface During Pulverised Coal Injection in a Blast Furnace,', Scandinavian Journal of Metallurgy, pp. 17 - 29
2000
Wu C; Sahajwalla VH, 2000, 'Dissolution Rates of Coals and Graphite in Fe-C-S melts in Direct Ironmaking: Influence of Melt Carbon and Sulfur on Carbon Dissolution,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 243 - 251
2000
Gao K; Sahajwalla VH; Sun H; Wheatley C; Dry R, 2000, 'Influence of Sulfur content and Temperature on the Carbon Boil and CO generation in Fe-C-S drops,', ISIJ International, pp. 301 - 308
2000
Sahajwalla VH; Khanna R, 2000, 'A Monte Carlo Simulation Study of Dissolution of Graphite in Iron-Carbon Melts,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 10, pp. 1517 - 1525
2000
Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla VH; Ostrovski O, 2000, 'Slag/Graphite Wettability and Reaction Kinetics: Part 1: Kinetics and Mechanism of the molten FeO Reduction Reaction,', Ironmaking and Steelmaking, pp. 367 - 372
2000
Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla V; Ostrovski O, 2000, 'Effect of different parameters on wettability of graphite by CaO-SiO2-Al2O3-FeO-MgO slag', Transactions of the Indian Institute of Metals, 53, pp. 479 - 486
2000
Lu LS; Sahajwalla VH; Harris D, 2000, 'Characteristics of Chars prepared from various Pulverised Coals at different temperatures using drop-tube furnace,', Energy and Fuels, 14, pp. 869 - 876
2000
Khanna R; Sahajwalla VH, 1999, 'Interaction Parameters for Monte Carlo Simulation of the Graphite/Fe-C Interface: a Phase Transition Study,', Scripta Materialia, pp. 1289 - 1294
1999
Sahajwalla VH; Khanna R, 1999, 'Influence of Sulphur on the Solubility of Graphite in Iron Melts: A Monte Carlo Simulation Study,', ACTA Materialia, pp. 793 - 800
1999
Zhou A; Suzuki K; Sahajwalla VH; Cadogan JM, 1999, 'A Mossbauer study of the gas based direct reduction of iron ore fines and application of the Johnson-Mehl-Avrami kinetic model to the reduction process', Scandinavian Journal of Metallurgy, pp. 65 - 69
1999
Khanna R; Sahajwalla VH, 1999, 'Monte Carlo Simulation of Phenomena occurring at the Solid Graphite/Fe-C Melt Interface,', Physica Status Solidi B - Basic Solid State Physics, pp. 47 - 58
1999
Sun H; Gao K; Sahajwalla VH; Mori K; Pehlke RD, 1999, 'Kinetics of Gas Oxidation of Liquid Fe-C-S Alloys and Carbon Boil Phenomenon,', ISIJ International, pp. 1125 - 1133
1999
Mehta AS; Gopalakrishna V; Sahajwalla VH, 1998, 'Squeeze casting- an alternative to forging', Metal Casting and Surface Finishing, pp. 12 - 17
1998
Khanna SK; Wu C; Sahajwalla VH, 1998, 'Estimation of critical particle engulfment velocity in metallurgical melts', Journal of High Temperature Materials and Processes, 17, pp. 193 - 201
1998
Wu C; Sahajwalla VH, 1998, 'Influence of melt carbon and sulfur on the wetting of solid graphite by Fe-C-S melts', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 471 - 477
1998
Sun H; Mori K; Sahajwalla VH; Pehlke RD, 1998, 'Carbon solution in Liquid iron and iron alloys', Journal of High Temperature Materials and Processes, 17, pp. 257 - 270
1998
Zhao L; Sahajwalla VH; Pehlke RD, 1998, 'Estimation of dynamic boundary conditions by combining experimental measurements with similitude theory', International Journal of Cast Metals Research, 11, pp. 63 - 69
1998
Chung UC; Lee IK; Kim H; Sahajwalla VH; Chung W, 1998, 'Degradation characteristics of iron ore fines of a wide size distribution in fluidized bed reduction', ISIJ International, pp. 943 - 952
1998
Cadogan JM; Suzuki K; Sahajwalla VH; Wexler D; Inoue A; Masumoto T, 1997, 'Magnetic Force Microscopy Study of Nanocrystalline Fe19Zr7B2', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, pp. 586 - 589
1997
Suzuki K; Wexler D; Cadogan JM; Sahajwalla VH; Inoue A; Masumaoto T, 1997, 'Magnetic force microscopy study of Nanocrystalline Fe91Zr7B2 soft magnetic alloy', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 226-228, pp. 554 - 558
1997
Siddiqi N; Sahajwalla VH; Ostrovski O; Belton GR, 1997, 'Wettability of graphite by CaO-SiO2-Al2O3-FeO-MgO slag', Journal of High Temperature Materials and Processes, 16, pp. 213 - 225
1997
Wu C; Sahajwalla VH; Pehlke RD, 1997, 'Wettability of Graphite Mould Coating by Iron and Steel: Mould/Metal Interfacial Phenomena', AFS Transactions, 105, pp. 739 - 744
1997
Zhao L; Sahajwalla VH; Pehlke RD, 1997, 'An Engineering Approach to Dynamic Boundary Conditions in Numerical Simulation of Casting Solidification Processes', International Journal of Cast Metals Research, 10, pp. 125 - 129
1997
Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumaoto T, 1997, 'On the Nanostructural formation process in Fe-M-B (M=Zr or Nb) soft magnetic alloys', Materials Science Forum, 235-238, pp. 765 - 770
1997
Mehta AS; Gopalakrishna V; Chatterji B; Sahajwalla VH, 1997, 'Squeeze Casting of an Al-Si-Mg Alloy', Metal Casting and Surface Finishing, pp. 30 - 35
1997
Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumoto T, 1997, 'The Role of Alloying Elements in Cu-free Nanocrystalline Fe-Nb-B soft magnetic alloys', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 226-228, pp. 586 - 589
1997
Suzuki K; Cadogan JM; Sahajwalla V; Inoue A; Masumoto T, 1996, 'Mössbauer study of amorphous and nanocrystalline Fe-Nb-B alloys', Materials Science Forum, 225-227, pp. 707 - 712
1996
Sahajwalla VH; Gao K, 1996, 'Determination of atomic structual dimensions of carbonaceous materials for their utilisation in the metallurgical industries', Metal Casting and Surface Finishing, pp. 16 - 23
1996
Wu C; Sahajwalla VH; Krauklis P, 1996, 'The effect of Austenitizing Process on the hardening behaviour of Cr-Mo-Mn-C air-hardening cast tool steel', ISIJ International, pp. 347 - 353
1996
Wu C; Sahajwalla VH; Krauklis P, 1995, 'The effect of heat treatment processing on hardness reduction of Cr-Mo-Mn-C air-hardening cast tool steel', Metal Casting and Surface Finishing, pp. 32 - 35
1995
Suzuki K; Cadogan JM; Dunlop JB; Sahajwalla VH, 1995, 'Two-stage nano-structural formation process in Fe-Nb-B soft magnetic alloys', Applied Physics Letters, pp. 1369 - 1371
1995
Suzuki K; Cadogan JM; Dunlop JB; Sahajwalla VH, 1995, 'Two-stage nano-structural formation process in Fe-Nb-B soft magnetic alloys', Journal of Applied Physics, pp. 1369 - 1371
1995
Sahajwalla V; Castillejos AH; Brimacombe JK,
1990,
'The spout of air jets upwardly injected into a water bath',
Metallurgical Transactions B,
21,
pp. 71 - 80,
http://dx.doi.org/10.1007/BF02658117 1990
Sahajwalla V; Brimacombe JK; Salcudean ME, 1989, 'Factors influencing the process efficiency of Gas-stirred ladles', Ironmaking and Steelmaking, 16, pp. 39 - 42
1989
Biswal S; Udayakumar S; Pahlevani F; Sarmadi N; Sahajwalla V,
2024,
'An investigative study on the interfacial behaviour of waste graphite resource with liquid iron', in
12th International Conference of Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings,
Australasian Institute of Mining and Metallurgy (AusIMM),
pp. 1495 - 1500, presented at
12th International Conference of Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings,
http://dx.doi.org/10.62053/gbjn2330 2024
Salehi H; Maroufi S; Nekouei RK; Sahajwalla V; Khayyam Nekouei R,
2023,
'Reclamation of Rare Earth Metals from Spent Ni-MH Batteries', in
Proceedings - European Metallurgical Conference, EMC 2023,
Duesseldorf, Germany,
pp. 877 - 903, presented at
European Metallurgical Conference 2023 (EMC 2023),
Duesseldorf, Germany,
11 June 2023,
http://dx.doi.org/10.26190/unsworks/30298 2023
Heo J; Kim T; Chung Y; Sahajwalla V; Park JH,
2022,
'Physical Chemistry of FeO Reduction in Electric Arc Furnace Slag by Secondary Aluminum Source as Reducing Agent', in
8th International Congress on the Science and Technology of Steelmaking, ICS 2022,
Montreal, Québec, Canada,
pp. 204 - 208, presented at
8th International Congress on the Science and Technology of Steelmaking,
Montreal, Québec, Canada,
02 August 2022 - 04 August 2022,
https://www.aist.org/AIST/aist/AIST/Conferences_Exhibitions/ICS/Physical-Chemistry-of-FeO-Reduc.pdf 2022
Siddika A; Hajimohammadi A; Sahajwalla V,
2021,
'Recycling of Automotive Vehicle’s Waste Glass to Develop Sustainable Glass Foam using a Curing-Sintering Process',
Concrete Institute of Australia,
Australia, presented at
Concrete Institute of Australia’s Biennial National Conference (Concrete 2021),
Australia,
05 September 2021 - 08 September 2021,
http://www.ciaconference.com.au/concrete2021/pdf/full-paper_168.pdf 2021
Hossain R; Pahlevani F; Sahajwalla V,
2018,
'Solid State Phase Transformation Mechanism in High Carbon Steel Under Compressive Load and with Varying Cr Percent', in
TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings,
Springer, Cham,
Phoenix, Arizona, USA,
pp. 797 - 802, presented at
TMS 2018 147th Annual Meeting & Exhibition,
Phoenix, Arizona, USA,
11 March 2018 - 15 March 2018,
http://dx.doi.org/10.1007/978-3-319-72526-0_75 2018
Tanaka Y; Pahlevani F; Sahajwalla V, 2018, 'Agglomeration Behavior of Non-Metallic Inclusions in Liquid High Carbon Steel', in TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, Phoenix, Arizona, USA, presented at TMS 2018 147th Annual Meeting & Exhibition, Phoenix, Arizona, USA, 11 March 2018 - 15 March 2018
2018
Handoko W; Pahlevani F; Sahajwalla V,
2018,
'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel',
Amsterdam, Netherlands, presented at
20th International Conference on Sustainable Materials and Structural Systems,
Amsterdam, Netherlands,
22 January 2018 - 23 January 2018,
http://dx.doi.org/10.26190/unsworks/26488 2018
Handoko W; Pahlevani F; Sahajwalla V,
2018,
'Effect of Retained Austenite Stability in Corrosion Mechanism of Dual Phase High Carbon Steel', in
International journal of materials and metallurgical Engineering,
http://dx.doi.org/10.1999/1307-6892/10008308 2018
Handoko W; Pahlevani F; Singla I; Kumar H; Sahajwalla V,
2018,
'Waste-Based Surface Modification to Enhance
Corrosion Resistance of Aluminium Bronze Alloy', in
International Journal of Chemical & Material Science,
IJSER,
pp. 661 - 665,
http://dx.doi.org/10.26190/unsworks/27004 2018
Echeverria Encina CA; Pahlevani ; Sahajwalla ,
2018,
'Interphase-interface characterization of novel engineered bio-composite systems with Scanning Electron Microscopy',
International Convention Centre (ICC), Sydney Australia, presented at
19th International Microscopy Congress,
International Convention Centre (ICC), Sydney Australia,
09 September 2018 - 14 September 2018,
http://dx.doi.org/10.26190/unsworks/27207 2018
Joshi R; Lian B; You Y; Sahajwalla V; Leslie G; Chen V; Bustamante H, 2018, 'Applications of graphene oxide membranes', in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, AMER CHEMICAL SOC, LA, New Orleans, presented at 255th National Meeting and Exposition of the American-Chemical-Society (ACS) - Nexus of Food, Energy, and Water, LA, New Orleans, 18 March 2018 - 22 March 2018
2018
Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla VH; Cholake S; Gorjizadeh N; Hossain R; Kumar R,
2017,
'Surface Modification of Steel Using Automotive Waste as Raw Materials',
Kruger National Park, South Africa, presented at
International Conference on Sustainable Materials Processing and Manufacturing, SMPM 2017,
Kruger National Park, South Africa,
23 January 2017 - 25 January 2017,
http://dx.doi.org/10.1016/j.promfg.2016.12.007 2017
Banerjee A; Pahlevani F; Sahajwalla V; Prusty G, 2017, 'Compressive deformation behaviour of high carbon steel at quasi-static strain rates', Sydney, Australia, presented at 9th Australasian Congress on Applied Mechanics (ACAM9), Sydney, Australia, 27 November 2017 - 29 November 2017
2017
Pahlevani F; Echeverria Encina CA; Handoko W; Sahajwalla V,
2017,
'Mattresses and fabrics as new resources for innovative building material',
Hunter Valley, NSW, presented at
Australian Industrial Ecology Conference 2017,
Hunter Valley, NSW,
06 September 2017 - 08 September 2017,
http://dx.doi.org/10.26190/unsworks/27198 2017
Rajarao R; Mansuri I; Sahajwalla V,
2016,
'High Voltage Pulses to Recover Copper from Waste Printed Circuit Boards', in
2016 WORLD CONGRESS ON SUSTAINABLE TECHNOLOGIES (WCST),
IEEE,
ENGLAND, London,
pp. 125 - 125, presented at
World Congress on Sustainable Technologies (WCST),
ENGLAND, London,
12 December 2016 - 14 December 2016,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000402316600019&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 2016
Maroufi S; Mansuri I; O’Kane P; Skidmore C; Jin Z; Fontana A; Zaharia M; Sahajwalla VH; Maroufi S; Mansuri I,
2016,
'Waste to Value in Steelmaking', in
Reddy RG; Chaubal P; Pistorius PC; Pal U (eds.),
Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016,
JOHN WILEY & SONS INC,
Seattle, USA,
pp. 3 - 15, presented at
10th international Conference on Molten Slag, Fluxes and Salts, TMS (The Minerals, Metals & Materials Society),
Seattle, USA,
22 May 2016 - 25 May 2016,
http://dx.doi.org/10.1007/978-3-319-48769-4 2016
Sahajwalla VH; Maroufi S; Zaharia M; Mansuri I; Rajarao R; Skidmore C; Jin Z; O’Kane P; Maroufi S; Mansuri I; Rajarao R, 2016, 'Green Manufacturing', Lulea, Sweden, presented at 5th International Conference on Process Development in Iron and Steelmaking, Lulea, Sweden, 12 June 2016 - 15 June 2016
2016
Echeverria C; Gaikwad V; Pahlevani F; Sahajwalla VH; Pahlevani F; Gaikwad V; Echeverria Encina C,
2016,
'Study of Macroalgae and Mollusc Wastes as Secondary Fillers in Novel Wood-Plastic Bio-composite Particleboard', in
Biocomp 2016,
Concepcion, Chile, presented at
The 13th Pacific Rim Bio-based Composites Symposium. Bio-based composites for sustainable futures,
Concepcion, Chile,
13 November 2016 - 15 November 2016,
http://dx.doi.org/10.26190/unsworks/26331 2016
Farzana R; Rajarao RAVINDRA; Sahajwalla VEENA, 2015, 'Transforming waste glass and plastic into SiC bearing resource for refractories', Novotel North Beach Hotel, Cliff Rd, North Wollongong, NSW Australia, presented at 9th National Conference of the Institute of Refractories Engineers, 2015, Novotel North Beach Hotel, Cliff Rd, North Wollongong, NSW Australia, 08 November 2015 - 09 November 2015
2015
Farzana R; Rajarao R; Sahajwalla V,
2014,
'Novel Recycling of Automotive Waste Glass and Plastics Through Their Chemical Transformation Into Ferrosilicon', in
2014 AISTech Conference Proceedings,
AIST,
Indianapolis, USA,
pp. 65 - 74, presented at
AISTech 2014,
Indianapolis, USA,
05 May 2014 - 08 May 2014,
http://digital.library.aist.org/pages/PR-366-012.htm 2014
Sahajwalla VH; farzana ; zaharia ; mansuri ; rajarao ; dhunna ; yunos ; khanna ; Saha-Chaudhury ; O'Kane ; Fontana ; Jin ; Skidmore ; Vielhauer ; O'Connell ; Knights , 2013, 'The Power of Steelmaking – harnessing high temperature reactions to transform waste into raw material resources', AIST Howe Memorial Lecture, Pittsburgh, presented at AISTECH 2013 Iron & Steel Technology Conference and Exposition, USA, AIST Howe Memorial Lecture, Pittsburgh, 06 May 2013 - 09 May 2013
2013
Farzana R; Sahajwalla V,
2013,
'Recycling Automotive Waste Glass and Plastic — An Innovative Approach',
Wiley,
Waikoloa, Hawaii, USA, presented at
The 8th Pacific Rim International Conference on Advanced Materials and Processing,
Waikoloa, Hawaii, USA,
04 August 2013 - 09 August 2013,
http://dx.doi.org/10.1002/9781118792148.ch282 2013
Zaharia M; Yunos NF; Sahajwalla V, 2013, 'Recycled and renewable materials as resources for electric arc furnace steelmaking', in From Materials to Structures Advancement Through Innovation Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials Acmsm 2012, pp. 21 - 27
2013
Wechsler A; Ramírez M; Crosky A; Zaharia M; Jones H; Ballerini A; Núñez M; Sahajwalla V, 2011, 'Physical properties of furniture panels from macadamia shells', in Iccm International Conferences on Composite Materials
2011
Wechsler A; Ramirez MJ; Crosky AG; Zaharia M; Jones H; Ballerini AA; Nunez MA; Sahajwalla VH, 2011, 'Sustainable furniture panel composites from forestry and food industry by-products in Australia', in eddBE2011 sustainable wellbeing, Queensland University of Technology, Brisbane, pp. 88 - 93, presented at First International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing, Brisbane, 27 April 2011 - 29 April 2011
2011
Yunos N; Ahmad K; Zaharia M; Sahajwalla VH, 2011, 'Agricultural wastes - A resource for EAF steelmaking', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, pp. 877 - 885, presented at AISTech 2011 Iron and Steel Technology Conference, Indianapolis, IN, United States, 02 May 2011 - 05 May 2011
2011
Jang D; Gupta S; Freislich M; Bhushan B; Sahajwalla VH, 2011, 'Carbothermic reduction and carburization behavior of iron ore carbon composite', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, pp. 531 - 541, presented at AISTech 2011 Iron and Steel Technology Conference, Indianapolis, IN, United States, 02 May 2011 - 05 May 2011
2011
Blagus A; Sahajwalla VH, 2011, 'Effect of Blending HDPE with Coke on the Reduction Behaviour of a Manganese Oxide', in Proceedings of the 50th Conference of Metallurgists, Canadian Institute of Mining and Petroleum, Westmount, Quebec, Canada, pp. 281 - 292, presented at Conference of Metallurgists 2011, Montreal, Quebec, Canada
2011
Sahajwalla VH; Zaharia M; Jang D; Dankwah J; Saha-Chaudhury NM; O Kane P; Skidmore C; Davis M; Knights D, 2011, 'Recycling waste polymers in iron oxide composite pellets for ironmaking', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, pp. 631 - 639, presented at AISTech 2011 Iron and Steel Technology Conference, Indianapolis, IN, United States, 02 May 2011 - 05 May 2011
2011
Dankwah J; Sahajwalla VH; Koshy P; Saha-Chaudhury NM; O Kane P; Knights D; Skidmore C, 2010, 'Kinetics of reduction of FeO in EAF steelmaking slag by metallurgical coke and waste plastics blends', AIST, USA, Pittsburgh, pp. Vol 1, 895 - Vol 1, 903, presented at AISTech 2010, Pittsburgh PA USA, 02 May 2010 - 05 May 2010
2010
Gupta SK; Kim B; Sahajwalla VH, 2010, 'Effect of Blending Rangal Coal on High-temperature Behavior of Cokes', AIST, USA, Pittsburgh, pp. Vol1, 303 - Vol 1, 315, presented at AISTech 2010, Pittsburgh PA USA, 02 May 2010 - 05 May 2010
2010
Kim B; Gupta SK; Sakurovs R; French D; Sahajwalla VH, 2009, 'Coal mineral transformations during carbonization and gasification', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 - 07 May 2009
2009
Haq M; Khanna R; Koshy P; Sahajwalla VH; Saha-Chaudhury NM, 2009, 'Recycling alumina-carbon refractory waste in steelmaking: Mechanisms of refractory degradation', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 - 07 May 2009
2009
Sahajwalla VH; Kongkarat S; Koshy P; Khanna R; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D, 2009, 'Carbon dissolution in steelmaking process - Recarburization using waste plastics', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 - 07 May 2009
2009
Sahajwalla VH; Rahman MF; Zaharia M; Koshy P; Khanna R; Saha-Chaudhury NM; O Kane P; Dicker JD; Skidmore C; Knights D; Lee J, 2009, 'Gas phase reactions of coke blends with plastics for chemical energy input into EAF steelmaking', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2009, St. Louis, Mo., USA, 04 May 2009 - 07 May 2009
2009
Gupta S; Wasaya A; Kerkkonen O; Kanniala R; Osborne DJ; Sahajwalla V, 2008, 'Effect of Coke Minerals and Carbon Structure on Coke Behaviour in the Ruukki Blast Furnace', in AISTech 2008 Proceedings, Pittsburg, USA, presented at AISTech2008, Pittsburg, USA, 05 May 2008 - 08 May 2008
2008
Sahajwalla VH; Khanna R; Saha-Chaudhury NM; Zaharia M; Rahman MM; Dicker JD; Kim B; Kongkarat S; Knights D; Skidmore C; O Kane P, 2008, 'Environmentally Sustainable EAF Steelmaking Through Introduction of Recycled Plastics and Tyres Laboratory and Plant Studies', in AISTech 2008 Proceedings, Pittsburg, USA, presented at AISTech2008, Pittsburg, USA, 05 May 2008 - 08 May 2008
2008
Kazuberns K; Gupta S; French D; Sakurovs R; Lindblom B; Hallin M; Sahajwalla V, 2008, 'Mineral Transformations of Coke in a Laboratory and Experimental Blast Furnace and Their effects on Reactivity', in AISTech 2008 Proceedings, Pittsburg, USA, presented at AISTech2008, Pittsburg, USA, 05 May 2008 - 08 May 2008
2008
Sahajwalla VH, 2007, 'High-temperature Performance of A12-O3-SiO-siC-C Refractory While Using Al and BN additives', in AISTech 2007 Proceedings, The Association for Iron and Steel Technology, USA, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Gupta S; Kim B; Grigore M; French D; Sakurovs R; Sahajwalla V, 2007, 'Effect of iron-bearing minerals on coke gasification', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Sahajwalla VH; Zaharia M; Antony A; Lee J; Darma S; Khanna R; Saha-Chaudhury NM; Knights D; O Kane P; Pretorius E, 2007, 'Combustion of organic waste materials for their utilization in electric arc furnace steelmaking', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Saha-Chaudhury NM; Sahajwalla VH; Guzzon M; Mapelli C; Memoli F; Pustorino M, 2007, 'Recycling Ladle Slag as Slag Former for EAF Steelmaking - A Study of Foaming Behaviour', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Osborne D; Gupta S; Sahajwalla V, 2007, 'Meeting Coal Quality Challenges for Global coke demand', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Sahajwalla VH; Rahman MM; Khanna R; Dicker JD, 2007, 'Novel industrial trials demonstrating the use of plastics for EAF slag foaming', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Kim B; Gupta S; Lee SH; Kim S; Sahajwalla VH, 2007, 'Devolatilization and cracking behaviour of Australian lumpy coals at high temperatures', in AISTech - Iron and Steel Technology Conference Proceedings, Association for Iron and Steel Technology, AISTECH, Warrendale, PA, United States, presented at AISTech 2007, Indianapolis, Indiana, 07 May 2007 - 10 May 2007
2007
Guzzon M; Sahajwalla V; Memoli F; Pustorino M,
2007,
'O COMPORTAMENTO DA ESCÓRIA DE METALURGIA SECUNDÁRIA NO FEA. COMO CRIAR UMA BOA ESCÓRIA ESPUMANTE COM A BASICIDADE ADEQUADA USANDO UMA MISTURA DE CAL E ESCÓRIA DE PANELA RECICLADA COMO FORMADORA DE ESCÓRIA DE FEA', in
ABM Proceedings,
Editora Blucher,
pp. 38 - 48, presented at
38º Seminário de Aciaria - Internacional,
31 July 2007 - 03 August 2007,
http://dx.doi.org/10.5151/2594-5300-2004-15395-0005 2007
Gupta SK; Dubikova M; Sahajwalla VH; Best M; Chaubal P; Youmans T, 2006, 'Mineral phase transformations of metallurgical cokes and their implications', in AISTech 2006, Cleveland, Ohio, USA, presented at Iron and Steel Technology Conference 2006, Cleveland, Ohio, USA, 01 May 2006 - 04 May 2006
2006
Sahajwalla VH; Khanna R; Rahman M; Saha-Chaudhury NM; Knights D; O Kane P; Tanaka E, 2006, 'Recycling of Waste Plastics for Slag Foaming in EAF Steelmaking', in Iron and Steel Technology Conference 2006, Cleveland, Ohio, USA, presented at Iron and Steel Technology Conference 2006, Cleveland, Ohio, USA, 01 May 2006 - 04 May 2006
2006
Rahman MM; Sahajwalla VH; Khanna R; Saha-Chaudhury NM; Knights D; O Kane P, 2006, 'Fundamental Understanding of Carbonaceous Material¿s Influence on Slag Foaming Behavior during EAF Steelmaking', in AISTech 2006, Cleveland, Ohio, USA, presented at Iron and Steel Technology Conference 2006, Cleveland, Ohio, USA, 01 May 2006 - 04 May 2006
2006
Koshy P; Gupta SK; Sahajwalla VH; Edwards P, 2006, 'Wetting behaviour of high alumina monolithic by non-ferrous metals: Role of non-wetting agents', in Materials Science and Technology Conference, Cincinnati, Ohio, pp. 55 - 66, presented at Materials Science and Technology Conference, Cincinnati, Ohio, 15 October 2006 - 19 October 2006
2006
Grigore M; French D; Sakurovs R; Gupta S; Sahajwalla V,
2006,
'Effect of coke mineralogy on the gasification behavior and their implications for innovative blast furnace operations', in
PROCEEDINGS OF THE FIRST AUSTRALIA-CHINA-JAPAN SYMPOSIUM ON IRON AND STEELMAKING,
LIAONING SCIENCE & TECHNOLOGY PUBL HOUSE,
PEOPLES R CHINA, Shenyang,
pp. 66 - 74, presented at
1st Australia-China-Japan Symposium on Iron and Steelmaking,
PEOPLES R CHINA, Shenyang,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000243745500009&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 2006
Gupta SK; Koshy P; Sahajwalla VH; Pauline M; Leicht N, 2005, 'Dynamic Wetting of High Alumina Monolithic Refractories by Aluminium Alloy', in Sustainable developments in metals processing : proceedings of the John Floyd International Symposium, AusIMM, Melbourne, Vic, presented at John Floyd International Symposium - Sustainable Developments in Metals Processing, Melbourne, Australia, 03 July 2005 - 06 July 2005
2005
Gupta SK; Koshy P; Sahajwalla VH; Pauline M; Leicht N, 2005, 'Influence of non-wetting agents on the modification of dynamic wetting of high alumina monolithic refractories by aluminium alloy', in UNITECR '05 :proceedings of Unified International Technical Conference on Refractories, John Wiley & Sons, New York, NY, presented at Unified International Technical Conference on Refractories : 9th Biennial Worldwide Congress on Refractories, Orlando, Florida, 08 November 2005 - 11 November 2005
2005
Hilding T; Kazuberns K; Gupta S; Sahajwalla VH; Sakurovs R; Bjorkman B; Wikstrom J, 2005, 'Effect of Temperature on coke properties and CO2 Reactivity under laboratory conditions and in an experimental Blast Furnace', in Iron and Steel Technology Conference 2005, Charlotte, USA, presented at AISTech 2005 The Iron and Steel Technology Conference, Charlotte, USA, 09 May 2005 - 12 May 2005
2005
Sahajwalla VH; Hong L; Saha-Chaudhury NM, 2005, 'Waste plastics ¿ A resource for EAF steelmaking', in Iron and Steel Technology Conference 2005, Charlotte, USA, presented at AISTech 2005 The Iron and Steel Technology Conference, Charlotte, USA, 09 May 2005 - 12 May 2005
2005
Sahajwalla VH; Rahman MM; Hong L; Saha-Chaudhury NM, 2005, 'Influence of carbonaceous materials on slag foaming behaviour during EAF steelmaking', in AISTech 2005 The Iron and Steel Technology Conference, Charlotte, USA, presented at AISTech 2005 The Iron and Steel Technology Conference, Charlotte, USA, 09 May 2005 - 12 May 2005
2005
Hilding T; Sahajwalla VH; Gupta SK; Bjorkman B; sakurovs R; Grigore M; Saha-Chaudhury NM, 2004, 'Study of gasification reaction of coke excavated from pilot blast furnace', in MEFOS (ed.), 2nd International Conference on Process Development in Iron and Steelmaking, Lulea, Sweden, pp. 467 - 478, presented at 2nd International Conference on Process Development in Iron and Steelmaking, Lulea, Sweden, 06 June 2004 - 09 June 2004
2004
Sahajwalla VH; Dubikova M; Khanna R, 2004, 'Reductant Characterization and Selection - Implications for Ferroalloys Processing', in 10th International ferroalloys Congress, INFACON X, Cape Town, South Africa, presented at 10th International ferroalloys Congress, INFACON X, Cape Town, South Africa, 01 February 2004 - 04 February 2004
2004
Sahajwalla VH; Hilding T; Oelreich AV; Gupta SK; Bjorkman B; Wikstrom J; Fredriksson P; Seetharaman S, 2004, 'Structure and Alkali content of Coke in an experimental Blast furnace and Their gasification Reaction', in Iron and Steel Technology Conference 2004, Nashville, Tennessee, USA, presented at Iron and Steel Technology Conference 2004, Nashville, Tennessee, USA, 15 September 2004 - 17 September 2004
2004
Gupta SK; Sahajwalla VH; Saha-Chaudhury NM; Burgo J; Chaubala P; Youmans T, 2004, 'Influence of Coke Properties and Reactivity on Coke Fines Behaviour in Blast Furnaces and Their Emmissions in Off gas dust', in Iron and Steel Technology Conference 2004, Nashville, Tennessee, USA, presented at Iron and Steel Technology Conference 2004, Nashville, Tennessee, USA, 15 September 2004 - 17 September 2004
2004
Sahajwalla VH; Khanna R, 2003, 'Fundamental investigation of Basic Mechanisms of Carbon Dissolution in Molten Iron', in Yazawa International Symposium, San Diego, Californa, USA, presented at Yazawa International Symposium, San Diego, Californa, USA, 02 March 2003 - 05 March 2003
2003
Sahajwalla VH; Khanna R; Spink J, 2003, 'Interfacial Phenomena During Interactions of Graphite/Alumina Refractories with Liquid Steel', in 62nd Ironmaking Conference and 86th Steelmaking Conference, Indianapolis, Indiana, presented at 86th Steelmaking Conference, Indianapolis, Indiana, 27 April 2003 - 30 April 2003
2003
Sahajwalla VH; Gupta SK; Al-Omari YI; Saha-Chaudhury NM; Rorick F; Hegedus G; Chaubala P; Burgo J; best M; hyle F, 2003, 'Combustion Characteristics of Pulverized Coals and Char Released in Blast Furnace Off-Gas', in 62nd Ironmaking Conference and 86th Steelmaking Conference, Indianapolis, Indiana, presented at 62nd Ironmaking Conference, Indianapolis, Indiana, 27 April 2003 - 30 April 2003
2003
Gupta SK; Sahajwalla VH; Al-Omari YI; Saha-Chaudhury NM; Rorick F; Hegedus G; Chaubala P; Burgo J; best M; hyle F, 2003, 'Atomic Structure of Coke Fines in Blast-Furnace Dust and Their Origin in Operating Blast Furnaces', in 62nd Ironmaking Conference and 86th Steelmaking Conference, Indianapolis, Indiana, presented at 62nd Ironmaking Conference, Indianapolis, Indiana, 27 April 2003 - 30 April 2003
2003
Sahajwalla VH; Sakurovs R; Grigore M; Cham ST; Dubikova M, 2003, 'Reaction Rate and Properties of Cokes during Reaction with Carbon Dioxide and Liquid Iron', in Ishii (ed.), Science and Technology of Innovative Ironmaking for aiming at Energy half Consumption, Tokyo, Japan, pp. 39 - 48, presented at Science and Technology of Innovative Ironmaking for aiming at Energy half Consumption, Tokyo, Japan, 28 September 2003 - 01 October 2003
2003
Wu C; Sahajwalla VH; Spink J, 2002, 'Kinetic Study of In-situ SiO2 Reduction in Carbon-bearing Refractories', in 61st Ironmaking Conference and 85th Steelmaking Conference, Nashville, USA, presented at 85th Steelmaking Conference, Nashville, USA, 10 March 2002 - 13 March 2002
2002
lu L; Sahajwalla VH; Kong CH; Harris D; Mclean A, 2002, 'Novel Equations to establish influence of char structure on reactivity during PCI in a blast furnace', in 61st Ironmaking Conference and 85th Steelmaking Conference, Nashville, USA, presented at 61st Ironmaking Conference, Nashville, USA, 10 March 2002 - 13 March 2002
2002
Mccarthy F; Sahajwalla VH; Hart JH, 2002, 'Metal/char interactions during Pulverised Coal Injection in a Blast Furnace', in 61st Ironmaking Conference and 85th Steelmaking Conference, Nashville, USA, presented at 61st Ironmaking Conference, Nashville, USA, 10 March 2002 - 13 March 2002
2002
Mccarthy F; Sahajwalla VH; Hart JH; Saha-Chaudhury NM, 2002, 'Coke/iron Interfacial phenomena', in Seetharaman S (ed.), Mills Symposium, London, England, pp. 397 - 406, presented at Mills Symposium, London, England, 22 August 2002 - 23 August 2002
2002
Zhao L; Sahajwalla VH; Spink J; Matthews J, 2002, 'Interfacial Phenomena During Wetting of Graphite/Alumina and Graphite/Magnesia Refractories by Liquid Steel', in 60th Electric Furnace Steelmaking Conference, Texas, USA, presented at 60th Electric Furnace Steelmaking Conference, Texas, USA, 10 November 2002 - 13 November 2002
2002
Sahajwalla VH; Mccarthy F; Cham ST; Hart JH; sakurovs R; Saha-Chaudhury NM, 2002, 'Influence of Carbonaceous Materials on Carburisation of Liquid Iron, paper accepted for publication in the Proceedings of the International Blast Furnace', in International blast furnace lower zone symposium, Wollongong, NSW, presented at International blast furnace lower zone symposium, Wollongong, NSW, 25 November 2002 - 27 November 2002
2002
Sahajwalla VH; Cadogan JM; Zhou A, 2002, 'Kinetics and Mossbauer spectroscopy studies of Direct Iron ore reduction', in AusIMM Student and Young Professional Conference Committee (ed.), AusIMM Student and Young Professional Conference 1997, Auckland, New Zealand, pp. 267 - 272, presented at AusIMM Student and Young Professional Conference 1997, Auckland, New Zealand, 01 September 2002 - 04 September 2002
2002
Sahajwalla VH; Kong CH; Lu L, 2001, 'Investigation of Combustion behaviour of a PCI Coal and Unburnt Char Carryover in a US Steel Blast Furnace', in 60th Ironmaking Conference, Warrendale, PA, United states of America, presented at 60th Ironmaking Conference, Warrendale, PA, United states of America, 25 March 2001 - 28 March 2001
2001
Sahajwalla VH; Wiblen RJ; Wu C, 2001, 'Influence of Properties of Carbonaceous Materials on Carbon Dissolution into Iron', in 60th Ironmaking Conference, Warrendale, PA, United states of America, presented at 60th Ironmaking Conference, Warrendale, PA, United states of America, 25 March 2001 - 28 March 2001
2001
Sahajwalla VH; Gray JL, 2001, 'Reoxidation of Laboratory Hot Briquetted Iron', in 60th Ironmaking Conference, Warrendale, PA, United states of America, presented at 60th Ironmaking Conference, Warrendale, PA, United states of America, 25 March 2001 - 28 March 2001
2001
Wiblen R; Sahajwalla V; Wu C, 2001, 'INFLUENCE OF PROPERTIES OF CARBONACEOUS MATERIALS ON CARBON DISSOLUTION INTO IRON', in 84th Steelmaking Conference Proceedings, pp. 747 - 755
2001
Gray J; Sahajwalla V; Honeyands T, 2001, 'Reoxidation of Laboratory Hot Briquetted Iron', in 60th Ironmaking Conference Proceedings, pp. 993 - 1003
2001
McKay J; Archer R; Sahajwalla V; Young D; Honeyands T,
2000,
'Communications - Reoxidation of hot briquetted iron in salt water', in
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE,
SPRINGER,
AUSTRALIA, SYDNEY,
pp. 1133 - 1135, presented at
Geoffrey Belton Memorial Symposium,
AUSTRALIA, SYDNEY,
http://dx.doi.org/10.1007/s11663-000-0089-9 2000
Wu C; Wiblen R; Sahajwalla V,
2000,
'Influence of ash on interactions during wetting of natural graphite by liquid iron', in
BELTON MEMORIAL SYMPOSIUM PROCEEDINGS,
IRON & STEEL SOCIETY,
AUSTRALIA, SYDNEY,
pp. 409 - 417, presented at
Belton Memorial Symposium,
AUSTRALIA, SYDNEY,
10 January 2000 - 11 January 2000,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000169876900032&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 2000
Mehta AS; Sahajwalla VH, 2000, 'Slag/Carbon Interactions at High Temperatures during Pulverised Coal Injection in a Blast Furnace,', in 6th International Conference Molten Slags, Fluxes and Salts, Stockholm-Helsinki, presented at 6th International Conference Molten Slags, Fluxes and Salts, Stockholm-Helsinki, 12 June 2000 - 17 June 2000
2000
Sahajwalla VH; Wu C; Wible , 2000, 'Factors Influencing Carbon Dissolution from Carbonaceous Materials into Fe-C-S Melts during Direct Iron Smelting,', in Brimacombe Memorial Symposium, Vancouver BC Canada, pp. 559 - 575, presented at Brimacombe Memorial Symposium, Vancouver BC Canada, 01 October 2000 - 04 October 2000
2000
McKay J; Archer R; Sahajwalla V; Young D,
2000,
'Reoxidation of hot briquetted iron in salt water', in
BELTON MEMORIAL SYMPOSIUM PROCEEDINGS,
IRON & STEEL SOCIETY,
AUSTRALIA, SYDNEY,
pp. 351 - 362, presented at
Belton Memorial Symposium,
AUSTRALIA, SYDNEY,
10 January 2000 - 11 January 2000,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000169876900027&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 2000
Kang T; Sahajwalla VH, 2000, 'Properties of Commercial Iron Oxides for COREX Process,', in International Congress on Mineral Processing and Extractive Metallurgy MINPREX 2000, Melbourne, presented at International Congress on Mineral Processing and Extractive Metallurgy 2000, Melbourne, 11 September 2000 - 13 September 2000
2000
Sahajwalla VH; Kang T; Lu LS, 2000, 'Properties and Reactivity of Coal Chars for COREX Process,', in International Congress on Mineral Processing and Extractive Metallurgy MINPREX 2000, Melbourne, presented at International Congress on Mineral Processing and Extractive Metallurgy 2000, Melbourne, 11 September 2000 - 13 September 2000
2000
Sahajwalla VH; Kong CH; Chaubal PC; Valia HS, 2000, 'Determination of Proportions of Coal Char and Coke Fines in the Top Off Gas Dust Samples from a Blast Furnace,', in 61st Ironmaking Conference and 85th Steelmaking Conference, Pittsburgh, Pennsylvania, presented at 59th Ironmaking Conference, Pittsburgh, Pennsylvania, 26 March 2000 - 29 March 2000
2000
Lu LS; Sahajwalla VH; Harris D, 2000, 'Coal Char Reactivity and Structure Evolution during PCI in Blast Furnace,', in 61st Ironmaking Conference and 85th Steelmaking Conference, Pittsburgh, Pennsylvania, presented at 59th Ironmaking Conference, Pittsburgh, Pennsylvania, 26 March 2000 - 29 March 2000
2000
Sahajwalla VH; Kangst T, 2000, 'Coal Char Gasification during the COREX Process,', in 61st Ironmaking Conference and 85th Steelmaking Conference, Pittsburgh, Pennsylvania, presented at 59th Ironmaking Conference, Pittsburgh, Pennsylvania, 26 March 2000 - 29 March 2000
2000
Sahajwalla VH; Mehta AS; Mccarley RW; Wallt ; Hart JH, 2000, 'Pulverised Coal Injection: Slag/char and Metal/char Interactions,', in Steel Technology International 2000, London, England, pp. 17 - 20, presented at Steel Technology International 2000, London, England
2000
Kang T; Sahajwalla VH, 2000, 'Investigation of Iron oxide Quality for COREX Plant,', in 61st Ironmaking Conference and 85th Steelmaking Conference, Pittsburgh, Pennsylvania, presented at 59th Ironmaking Conference, Pittsburgh, Pennsylvania, 26 March 2000 - 29 March 2000
2000
Moon JP; Sahajwalla VH, 1999, 'Utilisation of Waste streams containing iron oxide and carbon for Ironmaking,', in Goswami NG (ed.), International Workshop on Environmental and Waste Management, Jamshedpur India, pp. 27 - 35, presented at International Workshop on Environmental and Waste Management, Jamshedpur India, 02 December 1999 - 03 December 1999
1999
McCarthy F; Wu C; Sahajwalla V; Hart J, 1999, 'Dissolution Studies of Black Coal Chat m Blast Furnace Hot Metal During Pulverised Coal Injection', in 58th Ironmaking Conference Proceedings, pp. 605 - 612
1999
Lu LS; Sahajwalla VH; Harris D, 1999, 'Coal char structural characteristics during PCI in blast furnace - XRD studies on coal chars generated under different conditions', in 58th Ironmaking Conference, Chicago Illinois USA, presented at 58th Ironmaking Conference, Chicago Illinois USA, 21 March 1999 - 24 March 1999
1999
Mehta AS; Sahajwalla VH; Wall T, 1999, 'Influence of Basicity at the Slag/Carbon Interface on Reduction Reactions and Wettability during Pulverised Coal Injection in a Blast Furnace,', in 58th Ironmaking Conference, Chicago Illinois USA, presented at 58th Ironmaking Conference, Chicago Illinois USA, 21 March 1999 - 24 March 1999
1999
Eghlimi A; Lu L; Sahajwalla VH; Harris D, 1999, 'Computational Modelling of Char Combustion based on the Structure of Char particles,', in 2nd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, presented at 2nd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, 06 December 1999 - 08 December 1999
1999
Eghlimi A; Sahajwalla VH, 1999, 'Assessment of Turbulence Modeling in Investigating a Non-premixed Turbulent Flow,', in International Conference on Computational Technologies for Fluid/Thermal/Chemical Systems with Industrial Applications, Boston, Massachusetts, presented at International Conference on Computational Technologies for Fluid/Thermal/Chemical Systems with Industrial Applications, Boston, Massachusetts
1999
Mccarthy F; Wu C; Sahajwalla VH; Hart J, 1999, 'Dissolution Studies of Black Coal Char in Blast Furnace Hot Metal During PCI,', in 58th Ironmaking Conference, Chicago Illinois USA, presented at 58th Ironmaking Conference, Chicago Illinois USA, 21 March 1999 - 24 March 1999
1999
Moon JP; Sahajwalla VH; Bultitude P, 1999, 'Reduction of Ultra Fine Iron Oxide by Carbon in a Briquetted Form', in 58th Ironmaking Conference, Chicago Illinois USA, presented at 58th Ironmaking Conference, Chicago Illinois USA, 21 March 1999 - 24 March 1999
1999
Mccarthy F; Wu C; Sahajwalla VH; Strezov VC; Spink J, 1998, 'Wettability of refractories by Fe-C-S alloys', in Materials 98, Wollongong, NSW, presented at Materials 98, Wollongong, NSW, 06 July 1998 - 08 July 1998
1998
Mehta AS; Sahajwalla VH; Wall T, 1998, 'Wettablity of chars by blast furnace slags during pulverised coal injection- Influence of char type and slag composition', in The Aust Inst of Energy (ed.), 8th Australian Coal Science Conference, University of New South Wales, pp. 81 - 87, presented at 8th Australian Coal Science Conference, University of New South Wales, 07 December 1998 - 09 December 1998
1998
Gao K; Sahajwalla VH; Dry R, 1998, 'Influence of melt sulfur and silicon on carbon boil in Fe-C-S-Si metal drops', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Sun H; Mori K; Gao K; Sahajwalla VH, 1998, 'Oxidation of liquid iron-carbon drop by oxygen and generation of CO bubbles', in CAMP-ISIJ Conference, pp. 744 - 744, presented at CAMP-ISIJ Conference
1998
Farrell K; Sahajwalla VH; Harris D, 1998, 'The atomic scale structural features of some coals and chars', in The Aust Inst of Energy (ed.), 8th Australian Coal Science Conference, University of New South Wales, pp. 1 - 6, presented at 8th Australian Coal Science Conference, University of New South Wales, 07 December 1998 - 09 December 1998
1998
Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla VH; Ostrovski O, 1998, 'Slag/graphite/interaction-wettability phenomenon', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Mcloughlin B; Bernard B; Bultitude P; Franklin R; Sahajwalla VH; Moonj , 1998, 'Pig iron from chemically precipated steel oxide', in 1st ISS Australian Section Meeting, Wollongong, NSW, pp. 43 - 50, presented at 1st ISS Australian Section Meeting, Wollongong, NSW, 19 February 1998 - 20 February 1998
1998
Gao K; Sahajwalla VH; Dry R, 1998, 'Carbon boil phenomenon and oxygen absorption by metal drops in direct steel smelting', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Mehta AS; Sahajwalla VH; Poveromo JJ; Wall T, 1998, 'Fundamental investigation of slag/carbon/gas interaction occurring', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Mehta AS; Sahajwalla VH; Wall T, 1998, 'Investigation on the modes of consumption of residual char by the slag phase during pulverized coal injection in last furnace', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Mcdonald B; Wu C; Sahajwalla VH; Farrell K; Wall T, 1998, 'Dissolution of carbonaceous materials in blast furnace hot metal during pulverized coal injection', in International Cong. on Sci. and Tech. of Ironmaking (ICSTI 1998), Toronto, presented at International Cong. on Sci. and Tech. of Ironmaking (ICSTI`98), Toronto, 22 March 1998 - 25 March 1998
1998
Eghlimi A; Sahajwalla VH, 1997, 'Computational simulation of a fluidizing bed', in Narsimha R (ed.), 7th Asian Congress of Fluid Mechanics, Madras, India, pp. 645 - 648, presented at 7th Asian Congress of Fluid Mechanics, Madras, India, 08 December 1997 - 12 December 1997
1997
Eghlimi A; Sahajwalla VH, 1997, 'Pulverised Coal combustion in a 2D Furnace: Generalised Finite Rate Chemistry vs. Mixture Fraction/PDF/Equilibrium Model', in Suwono A; Manson GA (ed.), International Conference on Fluid and Thermal Energy Conversion 1997, Yogyakarta, Indonesia, pp. 25 - 30, presented at International Conference on Fluid and Thermal Energy Conversion 1997, Yogyakarta, Indonesia, 21 July 1997 - 24 July 1997
1997
Siddiqi N; Sahajwalla VH; Ostrovski O; Belton GR, 1997, 'Dynamic Wetting of Graphite by Slag containing Iron Oxide', in Belton JR (ed.), 5th International Conference on Molten Slags, Fluxes and Salts, Sydney, pp. 595 - 600, presented at 5th International Conference on Molten Slags, Fluxes and Salts, Sydney, 05 January 1997 - 08 January 1997
1997
Sahajwalla VH; Wu C, 1997, 'Occurrence and Prediction of surface defects in Metal Castings: Mold/Metal Interfacial phenomena', in Tambat ND (ed.), 45th Indian Foundry Congress, Mumbai India, pp. 183 - 202, presented at 45th Indian Foundry Congress, Mumbai India
1997
Mehta AD; Chen YP; Menezes N; Wong DF; Pileggi LT,
1997,
'Clustering and load balancing for buffered clock tree synthesis', in
INTERNATIONAL CONFERENCE ON COMPUTER DESIGN - VLSI IN COMPUTERS AND PROCESSORS, PROCEEDINGS,
I E E E, COMPUTER SOC PRESS,
TX, AUSTIN,
pp. 217 - 223, presented at
International Conference on Computer Design - VLSI in Computers and Processors (ICCD 97),
TX, AUSTIN,
12 October 1997 - 15 October 1997,
http://dx.doi.org/10.1109/ICCD.1997.628871 1997
Beeson J; Sahajwalla VH; Belton GR, 1997, 'Coal particle injection and devolatilisation under rapid heating conditions', in Battle TP (ed.), International Symposium on Processing and Handling of Powders and Dusts, Orlando, Florida, USA, pp. 179 - 188, presented at International Symposium on Processing and Handling of Powders and Dusts, Orlando, Florida, USA, 09 February 1997 - 12 February 1997
1997
Mehta AS; Sahajwalla VH; Poveromo JJ, 1997, 'Consumption of Residual char in Blast Furnace Coal Injection - Slag/carbon/gas interactions', in Mitchell GD (ed.), 56th Ironmaking Conference, Chicago Illinois USA, pp. 217 - 227, presented at 56th Ironmaking Conference, Chicago Illinois USA, 13 April 1997 - 16 April 1997
1997
Sahajwalla VH; Eghlimi A; Farrell K, 1997, 'Numerical Simulation of Pulverised Coal Combustion', in International Conference on CFD in Mineral and Metal Processing and Power Generation, Melbourne, presented at International Conference on CFD in Mineral and Metal Processing and Power Generation, Melbourne, 03 July 1997 - 04 July 1997
1997
Eghlimi A; Sahajwalla VH, 1997, 'Pulverised Coal Combustion in a 2D Furnace: Generalised Finite Rate Chemistry Vs. Mixture Fraction/PDF Model', in Suwono A; Manson GA (ed.), International Conference on Fluid and Thermal Energy Conversion 1997, Yogyakarta, Indonesia, pp. 25 - 30, presented at International Conference on Fluid and Thermal Energy Conversion 1997, Yogyakarta, Indonesia, 21 July 1997 - 24 July 1997
1997
Wu C; Sahajwalla VH, 1997, 'The Optimization of Abrasive Wear Resistance on Cr-Mo-Mn-C Air-hardening Cast Tool Steel', in Sun GX (ed.), 5th Asian Foundry Congress, Nanjing, China, pp. 310 - 319, presented at 5th Asian Foundry Congress, Nanjing, China, 23 September 1997 - 25 September 1997
1997
Mehta AS; Gopalakrishna V; Chatterji B; Sahajwalla VH, 1997, 'Squeeze Casting - An alternative to forging', in Hayes B (ed.), Australian Foundry Institute conference, Melbourne, pp. PAPER 6, presented at Australian Foundry Institute conference, Melbourne, 24 October 1997 - 27 October 1997
1997
Farrell K; Sahajwalla VH, 1997, 'Characterisation of Atomic Scale structural features in Carbonaceous Particles', in Battle TP (ed.), International Symposium on Processing and Handling of Powders and Dusts, Orlando, Florida, USA, pp. 213 - 224, presented at International Symposium on Processing and Handling of Powders and Dusts, Orlando, Florida, USA, 09 February 1997 - 12 February 1997
1997
Sahajwalla VH; Gao K; Wu C; Xia JJ; Burdett M, 1996, 'XRD and TEM studies of carbon structure to understand its dissoluation performance during ironmaking', in AusIMM Annual Conference 1996, Perth, WA, presented at AusIMM 1996 Annual Conference, Perth, WA, 24 March 1996 - 28 March 1996
1996
Sahajwalla VH; Cadogan JM; Zhou A, 1996, 'Kinetics & Mossbauer Spectroscopy Studies of Direct Iron Ore Reduction', in Resourcing the 21st Century, Ballarat, Victoria, pp. 267 - 272, presented at Resourcing the 21st Century, Ballarat, Victoria, 12 March 1996 - 15 March 1996
1996
Sahajwalla VH; Gao K; Dry R, 1996, 'Investigation of carbon boil phenomena in direct iron smelting', in Howard Worner International Symposium on Injection in Pyrometallurgy, Melbourne, presented at Howard Worner International Symposium on Injection in Pyrometallurgy, Melbourne, 01 July 1996 - 03 July 1996
1996
Suzuki K; Sahajwalla VH; Cadogan JM; Inoue A; Masumoto , 1995, 'Mossbauer study of amorphous and nanocrystalline Fe-Nb-B alloys', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at ISMANAM 95: International Sym on metastable, mechanically alloyed and nanocrystalline materials, Quebec, Canada, 24 July 1995 - 28 July 1995
1995
Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A, 1995, 'Time-temperature-transformation study of a nanocrystalline Fe91Zr7b2 soft magnetic alloy', in Journal of Applied Physics, American Institute of Physics, Melville, NY, presented at Annual Conference on Magnetism and Magnetic MAterials, Philadelphia, Pennsylvania, 06 November 1995 - 09 November 1995
1995
Sahajwalla VH; Waugh B; Roberts C; Langley JM; Farrell K; Gao K, 1995, 'Characterisation of carbon dissolution from the new auscarb clean carbon for ironmaking', in 54th Ironmaking Conference, Nashville, Pittsburg, presented at 54th Ironmaking Conference, Nashville, Pittsburg, 02 April 1995 - 05 April 1995
1995
Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumoto T, 1995, 'Mossbauer study of amporphous and nanocrystalline Fe-Nb-B alloys', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at ISMANAM 95: International Sym on metastable, mechanically alloyed and nanocrystalline materials, Quebec, Canada, 24 July 1995 - 28 July 1995
1995
Suzuki K; Sahajwalla VH; Cadogan JM; Inoue A; Masumoto , 1995, 'The role of the M element in nanocrystalline Fe-M-B (M=Zr, Hf and Nb) soft magnetic alloys', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at ISMANAM 95: International Sym on metastable, mechanically alloyed and nanocrystalline materials, Quebec, Canada, 24 July 1995 - 28 July 1995
1995
Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumoto T, 1995, 'Time-temperature-transformation stude of a nanocrystalline Fe91Zr7B2 soft magnetic alloy (in Journal of Applied Physics, 79(8), II).', in Journal of Applied Physics, American Institute of Physics, Melville, NY, presented at Annual Conference on Magnetism and Magnetic MAterials, Philadelphia, Pennsylvania, 06 November 1995 - 09 November 1995
1995
COLLER MLF; SAHAJWALLA V; TAYLOR IF; WRIGHT JK,
1994,
'SIMULATION OF CARBON DISSOLUTION FROM NON-GRAPHITIC SOURCES INTO IRON MELTS', in
6TH AUSIMM EXTRACTIVE METALLURGY CONFERENCE,
AUSTRALASIAN INST MINING & METALLURGY,
AUSTRALIA, BRISBANE,
pp. 287 - 294, presented at
6th AusIMM Extractive Metallurgy Conference,
AUSTRALIA, BRISBANE,
03 July 1994 - 06 July 1994,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1994BB79G00047&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 1994
SAHAJWALLA V; TAYLOR IF; WRIGHT JK; HARDIE GJ,
1994,
'DISSOLUTION OF CARBON INTO IRON MELTS - THE NEW DIRECT IRONMAKING PERSPECTIVE', in
Sohn HY (ed.),
METALLURGICAL PROCESSES FOR THE EARLY TWENTY-FIRST CENTURY, VOL I,
MINERALS, METALS & MATERIALS SOC,
CA, SAN DIEGO,
pp. 715 - 730, presented at
2nd International Symposium on Metallurgical Processes for the Year 2000 and Beyond/1994 TMS Extraction and Process Metallurgy Meeting,
CA, SAN DIEGO,
20 September 1994 - 23 September 1994,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1994BC22P00051&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 1994
SAHAJWALLA V; TAYLOR IF; WRIGHT JK,
1993,
'RATES OF CARBON TRANSFER FROM SOURCES INJECTED INTO FE-C-S MELTS', in
52ND IRONMAKING CONFERENCE PROCEEDINGS,
IRON & STEEL SOC AIME,
TX, DALLAS,
pp. 355 - 365, presented at
52nd Ironmaking Conference of the Iron-and-Steel-Society,
TX, DALLAS,
28 March 1993 - 31 March 1993,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1993BZ86V00042&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 1993
SAHAJWALLA V; PEHLKE RD,
1992,
'MODELING OF CRITICAL REACTIONS GOVERNING FINAL SULFUR-CONTENT OF METAL TAPPED FROM A CUPOLA', in
10TH PROCESS TECHNOLOGY CONFERENCE PROCEEDINGS - 2ND INTERNATIONAL SYMPOSIUM ON MODELING IN THE IRON AND STEEL INDUSTRY,
IRON & STEEL SOC AIME,
CANADA, TORONTO,
pp. 261 - 267, presented at
2ND INTERNATIONAL SYMP ON MODELING IN THE IRON AND STEEL INDUSTRY,
CANADA, TORONTO,
05 April 1992 - 08 April 1992,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1992BW76X00023&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 1992
SAHAJWALLA V; BRIMACOMBE JK; SALCUDEAN ME,
1989,
'FACTORS INFLUENCING THE PROCESS EFFICIENCY OF GAS-STIRRED LADLES', in
72ND STEELMAKING CONFERENCE PROCEEDINGS,
IRON & STEEL SOC AIME,
IL, CHICAGO,
pp. 497 - 501, presented at
72ND STEELMAKING CONF / 48TH IRONMAKING CONF,
IL, CHICAGO,
02 April 1989 - 05 April 1989,
https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:A1989BP71W00060&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1 1989