Research articles and publications

Assadi MHN; Sahajwalla V, 2022, Recycling End-of-life Polycarbonate in Steelmaking; $\textit{Ab Initio}$ Study of Carbon Dissolution in Molten Iron, http://dx.doi.org/10.48550/arxiv.2204.08706

Ramin L; Assadi MHN; Sahajwalla V, 2022, High-Density Polyethylene Degradation into Low Molecular Weight Gases at 1823 K: An Atomistic Simulation, http://dx.doi.org/10.48550/arxiv.2204.08253

Assefi M; S. Mofarah S; Maroufi S; Khayyam Nekouei R; Wang W; Kert E; Sahajwalla V, 2022, 'Regeneration of hydrogen through thermal micronisation of end-of-life polymers for sustainable reduction of iron oxide', Fuel Processing Technology, vol. 226, http://dx.doi.org/10.1016/j.fuproc.2021.107038

Hassan K; Hossain R; Sahajwalla V, 2022, 'Recycled ZnO-fused macroporous 3D graphene oxide aerogel composites for high-performance asymmetric supercapacitors', Journal of the American Ceramic Society, http://dx.doi.org/10.1111/jace.18697

Hossain R; Hassan K; Sahajwalla V, 2022, 'Utilising problematic waste to detect toxic gas release in the environment: fabricating a NiO doped CuO nanoflake based ammonia sensor from e-waste', Nanoscale Advances, http://dx.doi.org/10.1039/d1na00743b

Hossain R; Islam MT; Ghose A; Sahajwalla V, 2022, 'Full circle: Challenges and prospects for plastic waste management in Australia to achieve circular economy', Journal of Cleaner Production, vol. 368, http://dx.doi.org/10.1016/j.jclepro.2022.133127

Hossain R; Islam MT; Shanker R; Khan D; Locock KES; Ghose A; Schandl H; Dhodapkar R; Sahajwalla V, 2022, 'Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy', Sustainability (Switzerland), vol. 14, pp. 4425 - 4425, http://dx.doi.org/10.3390/su14084425

Hossain R; Nekouei RK; Al Mahmood A; Sahajwalla V, 2022, 'Value-added fabrication of NiO-doped CuO nanoflakes from waste flexible printed circuit board for advanced photocatalytic application', Scientific Reports, vol. 12, http://dx.doi.org/10.1038/s41598-022-16614-4

Hossain R; Sahajwalla V, 2022, 'Microrecycled Co3O4from waste lithium-ion battery: Synthesis, characterisation and implication in environmental application', Journal of Environmental Chemical Engineering, vol. 10, http://dx.doi.org/10.1016/j.jece.2022.107858

Islam MT; Huda N; Baumber A; Hossain R; Sahajwalla V, 2022, 'Waste battery disposal and recycling behavior: a study on the Australian perspective', Environmental Science and Pollution Research, http://dx.doi.org/10.1007/s11356-022-19681-2

Khayyam Nekouei R; Mofarah S; Hossein R; Maroufi S; Sahajwalla V, 2022, 'Roles of experimental variables in optimised fabrication of microrecycled CuO-based photoelectrodes', Materials Today Sustainability, vol. 18, pp. 100111 - 100111, http://dx.doi.org/10.1016/j.mtsust.2022.100111

Maroufi S; Mofarah SS; Khayyam Nekouei R; Sahajwalla V, 2022, 'Tailoring of a highly stable Mn1−x−y(CexLay)O2−δ pseudocapacitor thin-film and rare earth oxide nanospheres through selective purification of rare earth oxides derived from Ni-MH batteries', Green Chemistry, vol. 24, pp. 1659 - 1672, http://dx.doi.org/10.1039/d1gc02802b

Nekouei RK; Mofarah SS; Maroufi S; Wang W; Mansuri I; Sahajwalla V, 2022, 'Unraveling the Role of Oxides in Electrochemical Performance of Activated Carbons for High Voltage Symmetric Electric Double-Layer Capacitors', ADVANCED ENERGY AND SUSTAINABILITY RESEARCH, vol. 3, http://dx.doi.org/10.1002/aesr.202100130

Nur-A-Tomal MS; Biswal S; Pahlevani F; Sahajwalla V, 2022, 'Recycling tannery solid wastes as an alternative carbon resource for ironmaking', Journal of Material Cycles and Waste Management, vol. 24, pp. 2030 - 2040, http://dx.doi.org/10.1007/s10163-022-01465-y

Nur-A-Tomal MS; Pahlevani F; Sahajwalla V, 2022, 'Study on the Direct Transformation of Milk Bottle and Wood into Wood–Plastic Composite through Injection Molding', Journal of Composites Science, vol. 6, pp. 230 - 230, http://dx.doi.org/10.3390/jcs6080230

Shanker R; Khan D; Hossain R; Islam MT; Locock K; Ghose A; Sahajwalla V; Schandl H; Dhodapkar R, 2022, 'Plastic waste recycling: existing Indian scenario and future opportunities', International Journal of Environmental Science and Technology, http://dx.doi.org/10.1007/s13762-022-04079-x

Siddika A; Hajimohammadi A; Sahajwalla V, 2022, 'Powder sintering and gel casting methods in making glass foam using waste glass: A review on parameters, performance, and challenges', Ceramics International, vol. 48, pp. 1494 - 1511, http://dx.doi.org/10.1016/j.ceramint.2021.10.066

Siddika A; Hajimohammadi A; Sahajwalla V, 2022, 'Stabilisation of pores in glass foam by using a modified curing-sintering process: sustainable recycling of automotive vehicles’ waste glass', Resources, Conservation and Recycling, vol. 179, pp. 106145 - 106145, http://dx.doi.org/10.1016/j.resconrec.2021.106145